We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua blue duplex fiber patch cable with LC connectors on both ends, 5 m length

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Duplex LC/LC 5 m Aqua Blue 50/125 µm BIMMF

SKU CH-TT17-KGNKD

A 5 m duplex LC/LC OM4 multimode patch cable with bend-insensitive 50/125 µm Corning fiber for 40G and 100G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length5 m
  • ColorAqua Blue
  • ShieldedNo
  • OM4 multimode fiber enables 40 Gbps and 100 Gbps Ethernet links
  • UPC polished connectors reduce return loss for cleaner signal transmission
  • Bend-insensitive design maintains low attenuation when routed through tight spaces
  • Corning ultra-pure glass core delivers low loss and high bandwidth performance
  • 5 m aqua duplex patch cord suits data-center cross-connect and interconnect runs

5 m OM4 Duplex LC/LC Patch Cable

This five-metre aqua-blue patch cable uses OM4 multimode fibre with LC/UPC connectors on both ends. It is built for short-to-medium links in data-centre, telecom-room and entrance-facility interconnects. The bend-insensitive design reduces attenuation when the cable is routed around tight corners. Each unit ships with its own factory test report.

OM4 Multimode 50/125 µm Core

The 50/125 µm bend-insensitive multimode fibre supports 10 G, 40 G and 100 G Ethernet rates over the distances typical in enterprise racks. UPC polish on the LC ferrules yields low return loss for cleaner signal integrity. Corning ultra-pure glass keeps attenuation low across the full link budget.

Plug-and-Play LC Duplex Installation

LC connectors snap into standard SFP/SFP+ transceivers and patch panels without tools. The 2.0 mm duplex jacket is flexible enough for dense cable managers but retains enough stiffness to avoid kinking. The main risk is contaminating the ferrule end-faces; always clean with a lint-free wipe and inspect before mating. Do not use this cable for single-mode or long-haul runs that require a different core size.

Highlights

  • OM4 multimode fiber enables 40 Gbps and 100 Gbps Ethernet links
  • UPC polished connectors reduce return loss for cleaner signal transmission
  • Bend-insensitive design maintains low attenuation when routed through tight spaces
  • Corning ultra-pure glass core delivers low loss and high bandwidth performance
  • 5 m aqua duplex patch cord suits data-center cross-connect and interconnect runs

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BLC
Length5 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

What bandwidth can this 5 m OM4 cable actually carry in a live link?

The OM4 multimode fiber supports 10G, 40G and 100G Ethernet over short to medium distances, so a 5 m run will handle any of those rates without being the bottleneck.

The connectors are LC UPC — what does that limit in practice?

UPC polish gives low return loss on the LC duplex interface, which is standard for multimode patching in data-centre and telecom rooms; it does not impose a distance or speed cap beyond the OM4 fibre itself.

How much space does the 2.0 mm duplex jacket need to route cleanly?

At 2.0 mm overall diameter the cable bends tightly thanks to bend-insensitive Corning fibre, so it fits dense patch panels and cable managers without special raceways.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.