We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with LC connectors on both ends, 10 m length, 2.0 mm jacket

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Duplex LC/LC 10 m Aqua 50/125 µm BIMMF

SKU CH-B1K0-TVTJ2

A 10 metre duplex OM4 multimode fiber patch cable with LC to LC UPC connectors for 40G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length10 m
  • ColorAqua Blue
  • ShieldedNo
  • OM4 multimode supports 40G Ethernet and beyond
  • UPC connectors provide improved return loss performance
  • Bend-insensitive design reduces attenuation during installation
  • Corning ultra-pure glass ensures low attenuation
  • 10 metre duplex LC/LC aqua cable for data centres

Versatile 10 m OM4 Duplex Patch Cable

This 10 metre OM4 multimode duplex cable connects LC ports in entrance facilities, telecommunications rooms and data centres. The aqua jacket identifies the 50/125 µm bend-insensitive multimode fibre, which supports short to medium-range links at 40 Gbps and beyond. Corning ultra-pure glass cores keep attenuation low across the run. Each unit ships with a factory test report.

UPC Connectors and Bend-Insensitive Fibre

LC/UPC ferrules on both ends provide a polished surface finish that improves return loss compared with standard PC polish. The bend-insensitive multimode design reduces additional loss when the cable is routed around tight corners or through dense trays. OFNR-rated 2.0 mm duplex zipcord handles indoor riser pathways without extra conduit. No shield is present, so keep runs away from strong EMI sources.

Verify LC Ports and OM4 Compatibility Before

Confirm that both active devices present LC duplex receptacles and that the link budget is calculated for OM4 50/125 µm fibre at the intended data rate. The 10 m length (33 ft) suits rack-to-rack or cross-connect distances; longer runs will need a different cable. This cable does not fit SC, ST or MPO interfaces.

Highlights

  • OM4 multimode supports 40G Ethernet and beyond
  • UPC connectors provide improved return loss performance
  • Bend-insensitive design reduces attenuation during installation
  • Corning ultra-pure glass ensures low attenuation
  • 10 metre duplex LC/LC aqua cable for data centres

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BLC
Length10 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

How can I confirm the 10 m LC/LC patch cable is performing correctly after installation?

Each cable ships with a factory test report showing insertion loss and return loss for the UPC connectors, so you can compare measured values against the report to verify the link is within spec.

What comes in the box and what must I supply separately?

The box contains the 10 m aqua duplex LC/LC cable with bend-insensitive OM4 fiber and the test report; transceivers, patch panels and cleaning tools are not included.

When should I choose this 10 m OM4 duplex version over a different length or fiber type?

Choose this 10 m OM4 duplex cable when you need bend-insensitive 50/125 µm fiber for 40G and 100G Ethernet runs up to 100 m in data centers or telecom rooms.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.