We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Violet duplex LC/LC fiber patch cable, 10 m, 2.0 mm jacket

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Duplex LC/LC 10 m 50/125 µm BIMMF Violet

SKU CH-4E2V-3BK8F

A 10 m duplex LC-to-LC patch cord with OM4 bend-insensitive multimode fiber for 40G and 100G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length10 m
  • ColorViolet
  • ShieldedNo
  • OM4 multimode delivers high bandwidth for 40G and 100G Ethernet
  • Bend-insensitive fiber reduces attenuation when cables are bent or twisted
  • UPC connectors provide better surface finish and improved return loss
  • Corning ultra-pure glass ensures low attenuation and high bandwidth
  • Each cable includes a test report verifying performance

What this cable is and who needs it

This Intellinet OM4 multimode duplex patch cable uses LC/UPC connectors on both ends and spans 10 m (33 ft). It is built for short to medium-range, high-speed links in data centers, telecommunications rooms and entrance facilities where 40 G Ethernet and faster speeds are required. The violet jacket follows common OM4 color coding for quick visual identification.

Practical limits of the OM4 multimode standard

OM4 multimode fiber supports 10 G, 40 G and 100 G Ethernet over short to medium distances, but reach is constrained by the 50/125 µm core/cladding geometry and the optics used. The cable is rated OFNR for riser spaces, not plenum, so it cannot be installed in air-handling areas without additional fire-code measures. No shielding is present, so electromagnetic immunity relies on the fiber medium itself.

Installation ease and common pitfalls

Bend-insensitive multimode fiber (BIMMF) reduces attenuation when the cable is routed around tight corners, making pulls through dense cable trays more forgiving. LC/UPC ferrules demand clean end-faces; any contamination degrades return loss, so inspect and clean before mating. Each unit ships with a test report confirming insertion loss. Verify that the patch-panel density and connector polarity match the system design before terminating.

Highlights

  • OM4 multimode delivers high bandwidth for 40G and 100G Ethernet
  • Bend-insensitive fiber reduces attenuation when cables are bent or twisted
  • UPC connectors provide better surface finish and improved return loss
  • Corning ultra-pure glass ensures low attenuation and high bandwidth
  • Each cable includes a test report verifying performance

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BLC
Length10 m
ColorViolet
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

Should I choose the 10 m length or a different size for my rack-to-rack run?

This cable is 10 m (33 ft) long. Pick a length that reaches between your patch panels with a little slack; avoid excess coil that adds bend risk.

What real-world throughput can I expect from the OM4 multimode rating?

OM4 multimode fiber supports 40 G and 100 G Ethernet over short distances. The 50/125 µm core and bend-insensitive design keep loss low in dense trays.

How do the LC/UPC connectors and duplex layout affect my switch ports?

Two LC/UPC ferrules give a duplex link — one transmit, one receive. The ultra-physical-contact polish reduces return loss on each transceiver port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.