We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Intellinet Network Solutions

Intellinet Network Solutions OM4 LC-SC Duplex Fiber Patch Cable 2 m Aqua 50/125 BIMMF

SKU CH-R8AD-NTQET

A 2 m duplex fiber patch cable with LC and SC connectors using OM4 50/125 µm bend-insensitive multimode fiber for 10, 40 and 100 G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BSC
  • Length2 m
  • ColorAqua Blue
  • ShieldedNo
  • Supports 40G and 100G Ethernet speeds with OM4 multimode fiber
  • Bend-insensitive design reduces signal loss during tight routing and maintenance
  • UPC connectors deliver improved return loss for cleaner signal integrity
  • Corning ultra-pure glass core provides low attenuation over 2 m links
  • Includes factory test report verifying performance before installation

Duplex OM4 Patch Cable for Data Centres

This 2-metre aqua-coloured cable connects LC and SC interfaces using 50/125 µm bend-insensitive multimode fibre. It is built for cross-connect and interconnect work in entrance facilities, telecommunications rooms and data centres where short-to-medium reach links are required.

UPC Connectors and Corning Glass with Test Report

Ultra Physical Contact ferrules give a finer end-face finish and lower return loss, while Corning ultra-pure glass provides low attenuation and high bandwidth. Every unit ships with its own factory test report confirming insertion loss and geometry.

Simple Plug-In Install with Bend Margin

The bend-insensitive design tolerates tight routing around cable trays and patch panels without excess attenuation. Installers only need to clean both end-faces before mating; the main risk is skipping that cleaning step, which degrades return loss.

Highlights

  • Supports 40G and 100G Ethernet speeds with OM4 multimode fiber
  • Bend-insensitive design reduces signal loss during tight routing and maintenance
  • UPC connectors deliver improved return loss for cleaner signal integrity
  • Corning ultra-pure glass core provides low attenuation over 2 m links
  • Includes factory test report verifying performance before installation

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BSC
Length2 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

Will the LC or SC connectors on this OM4 duplex patch cable need periodic cleaning or replacement?

The UPC-polished LC and SC connectors benefit from regular inspection and cleaning with lint-free wipes and isopropyl alcohol; no scheduled replacement is required unless end-face damage is found.

What bandwidth distance limit appears first when this 2 m OM4 cable runs 40 G Ethernet continuously?

At 40 G Ethernet the OM4 50/125 µm fiber supports up to 100 m, so a 2 m link is far below the distance limit; the practical constraint becomes the transceiver rather than the cable.

How much heat or power does this 2 m OM4 duplex cable add when it carries 100 G traffic all day?

The passive glass fiber and UPC connectors draw no power and generate no measurable heat; all thermal load comes from the active transceivers at each end.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.