We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with SC connectors at each end, 2 m long

Intellinet Network Solutions

Intellinet Network Solutions OM3 Multimode Duplex SC/SC 2 m Aqua 50/125 µm BIMMF

SKU CH-H4JH-N3YBS

OM3 multimode duplex SC/SC patch cable, 2 m aqua jacket, 50/125 µm bend-insensitive Corning fiber with UPC connectors for 10G to 100G links

  • TypeFiber
  • Connector ASC
  • Connector BSC
  • Length2 m
  • ColorAqua Blue
  • ShieldedNo
  • Ready for 40G and 100G Ethernet speeds with OM3 multimode fiber
  • UPC connectors deliver low return loss for cleaner signal integrity
  • Bend-insensitive fiber reduces attenuation when routed through tight spaces
  • Corning ultra-pure glass core ensures low attenuation and high bandwidth
  • Includes factory test report verifying link performance per cable

2 m OM3 SC/SC Duplex Patch Cable

This 2 m aqua duplex patch cable uses OM3 multimode fibre with SC/UPC connectors on both ends. It is built with 50/125 µm bend-insensitive Corning glass and an OFNR jacket for indoor routing. The cable arrives with a factory test report confirming insertion loss and return loss performance.

Ideal for 10G, 40G and 100G links in data centres

Suits technicians who need a short, pre-terminated OM3 jumper for cross-connects, patch panels or switch-to-switch runs up to 2 m. Not suited for installations requiring longer reach, single-mode fibre, LC or MPO connectors, or outdoor-rated jackets.

OM3 50/125 µm bend-insensitive multimode fibre

The OM3 50/125 µm BIMMF core determines the cable's bandwidth ceiling and supported Ethernet speeds; verify that your transceivers and link budget are designed for OM3 multimode before purchasing.

Highlights

  • Ready for 40G and 100G Ethernet speeds with OM3 multimode fiber
  • UPC connectors deliver low return loss for cleaner signal integrity
  • Bend-insensitive fiber reduces attenuation when routed through tight spaces
  • Corning ultra-pure glass core ensures low attenuation and high bandwidth
  • Includes factory test report verifying link performance per cable

Specifications

BrandIntellinet Network Solutions
ModelOM3 Multimode Duplex
TypeFiber
Connector ASC
Connector BSC
Length2 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

Will the SC connectors fit my standard SC ports?

Yes, both ends use SC connectors with UPC polish that mate with any standard SC duplex adapter.

How do I install the cable without damaging the fiber?

Route the 2.0 mm jacketed duplex cable using the bend-insensitive design, but avoid kinking or exceeding the minimum bend radius during pulling.

When should I replace this patch cord?

Replace it if the aqua jacket shows cuts, the SC ferrules are scratched, or insertion loss rises above the original test-report baseline.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.