We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua blue 30 m duplex LC to LC fiber patch cable with 2.0 mm jacket

Intellinet Network Solutions

Intellinet Network Solutions OM3 Multimode Duplex LC/LC 30 m Aqua Blue

SKU CH-PSF8-T8MBF

30 m OM3 duplex LC/LC patch cable with bend-insensitive 50/125 µm fiber, UPC connectors and Corning glass for 40G and 100G links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length30 m
  • ColorAqua Blue
  • ShieldedNo
  • OM3 multimode fiber supports 40 GbE and 100 GbE links
  • UPC connectors deliver low return loss for reliable signals
  • Bend-insensitive design reduces attenuation during tight routing
  • Corning ultra-pure glass ensures low loss over 30 m
  • Each cable ships with its own test report

Versatile Connectivity Applications

This 30 m duplex patch cable connects equipment in entrance facilities, telecommunications rooms, data centers, and at the desk. LC UPC connectors on both ends provide a better surface finish and improved return loss for reliable links. The aqua jacket identifies the OM3 multimode rating at a glance. It suits interconnect and cross-connect scenarios where consistent performance matters.

Low Signal Loss and Bend Resilience

OM3 multimode fiber delivers high bandwidth and low attenuation for 10G Ethernet and optimized 40G and 100G Ethernet within data centers. Bend insensitive multimode fiber reduces attenuation when the cable is bent or twisted during routing. Corning ultra-pure glass construction supports the low loss and high bandwidth required for demanding network infrastructures. The 2.0 mm jacket protects the 50/125 µm cores in normal handling.

Included Test Report Verifies Quality

Each cable ships with a test report confirming measured performance before it leaves the factory. OFNR rating allows installation in riser spaces without additional conduit. UPC polish on both LC connectors ensures the improved return loss the design targets. No software or extra accessories are bundled beyond the documented test results.

Highlights

  • OM3 multimode fiber supports 40 GbE and 100 GbE links
  • UPC connectors deliver low return loss for reliable signals
  • Bend-insensitive design reduces attenuation during tight routing
  • Corning ultra-pure glass ensures low loss over 30 m
  • Each cable ships with its own test report

Specifications

BrandIntellinet Network Solutions
ModelOM3 Multimode Duplex
TypeFiber
Connector ALC
Connector BLC
Length30 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

How do I install the 30 m LC duplex patch cable, and what step is often missed?

Clean both LC UPC ferrules before insertion, route the 2.0 mm jacket without tight bends, and verify link lights — skipping the cleaning step causes high return loss on OM3 multimode links.

What maintenance or replacement will the 30 m OM3 cable need later?

Periodic connector cleaning with lint-free wipes and isopropyl alcohol; the Corning glass fiber and bend-insensitive design resist degradation, so only damaged connectors require replacement.

What limit appears first on a 30 m OM3 run under sustained 40G Ethernet traffic?

The OM3 modal bandwidth ceiling — 40G and 100G Ethernet are supported within data-center distances, but 30 m approaches the practical reach for error-free 40G operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.