We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre patch cable with LC connectors both ends, 1 metre length

Intellinet Network Solutions

Intellinet Network Solutions OM3 Multimode Duplex LC/LC 1 m Aqua 50/125 µm BIMMF

SKU CH-JS1P-VK52N

One-metre duplex LC-to-LC OM3 multimode patch cord with 50/125 µm bend-insensitive fiber, UPC polish and aqua jacket for 40G and 100G links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length1 m
  • ColorAqua Blue
  • ShieldedNo
  • Ready for 40G Ethernet and beyond with OM3 multimode fiber
  • UPC connectors deliver low return loss for cleaner signals
  • Bend-insensitive design reduces attenuation during tight routing
  • Corning ultra-pure glass fiber ensures low attenuation and high bandwidth
  • Each cable includes a factory test report for verified performance

Versatile Connectivity for Data Centers

This fiber optic patch cable uses OM3 multimode fiber with LC/UPC connectors on both ends. It is built for interconnect and cross-connect applications in entrance facilities, telecommunications rooms, data centers and at the desk. The aqua jacket identifies the OM3 rating and the 1 m length suits short-range links.

Bend-Insensitive Design Reduces Signal Loss During

Corning ultra-pure glass and bend-insensitive multimode fiber minimize attenuation when the cable is bent or twisted during installation. The 2.0 mm duplex jacket carries two 50/125 µm fibers without metallic shielding. UPC polishing on the LC ferrules provides a better surface finish and improved return loss for reliable transmission.

Optimized for 40G and 100G Ethernet Over Short

The OM3 multimode construction supports high bandwidth with low signal loss for 10G, 40G and 100G Ethernet applications in enterprise and data center environments. Each cable ships with a factory test report confirming performance. It is not suited for long-haul single-mode runs or installations that require armored or plenum-rated cable.

Highlights

  • Ready for 40G Ethernet and beyond with OM3 multimode fiber
  • UPC connectors deliver low return loss for cleaner signals
  • Bend-insensitive design reduces attenuation during tight routing
  • Corning ultra-pure glass fiber ensures low attenuation and high bandwidth
  • Each cable includes a factory test report for verified performance

Specifications

BrandIntellinet Network Solutions
ModelOM3 Multimode Duplex
TypeFiber
Connector ALC
Connector BLC
Length1 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

How do I install this 1 m LC-to-LC patch cable and what is the common mistake?

Insert each LC connector straight until it clicks; the step often missed is cleaning both ferrule end-faces with a lint-free wipe and isopropyl alcohol before mating to avoid contaminating the UPC polish.

What maintenance or replacement will this duplex OM3 cable need over time?

Periodically inspect and clean the LC ferrules; replace the patch cord if insertion loss rises above your link budget or if the 2.0 mm jacket shows kinks, cracks, or permanent bends from repeated moves.

What limit appears first when this BIMMF cable runs sustained 40G or 100G traffic?

The modal bandwidth of the OM3 50/125 µm fiber caps reach at 100 m for 40G/100G Ethernet, so link distance — not the bend-insensitive design — is the first constraint under sustained high-rate use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.