We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex single-mode SC/SC fibre patch cable, 10.0 m, yellow jacket

Intellinet Network Solutions

Intellinet Network Solutions Duplex Single-Mode SC/SC 9/125 OS2 10.0 m Yellow fibre optic cable

SKU CH-TV8V-FCMZ0

A 10.0 m yellow duplex single-mode fibre patch cable with SC/SC connectors for long-distance 10G Ethernet links

  • UPC connectors reduce return loss for clearer signals
  • Single-mode 9/125 µm fibre supports 10G Ethernet and beyond
  • 0 m (33.0 ft) duplex link spans rack-to-rack runs
  • All-dielectric construction resists EMI and lightning strikes
  • Light-based transmission secures data over 100 km distances

Duplex single-mode 10 m patch cable

This duplex single-mode fibre patch cable uses SC/SC connectors and a 9/125 µm OS2 core. It is built for long-distance links in campus, metro or data-centre environments. Installers who need a reliable 10 metre run between patch panels or transceivers will find it ready to deploy.

UPC polish and EMI immunity

Ultra Physical Contact ferrules give a smoother end-face and lower return loss for cleaner signals. The all-dielectric construction contains no metallic components, so the cable can be routed near power lines, utility corridors or railway tracks without electromagnetic interference. Yellow jacket colour identifies the single-mode type at a glance.

Lifetime warranty and 10G+ headroom

A lifetime warranty backs the cable for the duration of the installation. The specification supports 10 Gigabit Ethernet and higher data rates over distances that can exceed 100 kilometres in compatible systems. Buyers who require multimode cores, LC connectors or shorter pre-terminated lengths will need a different product.

Highlights

  • UPC connectors reduce return loss for clearer signals
  • Single-mode 9/125 µm fibre supports 10G Ethernet and beyond
  • 0 m (33.0 ft) duplex link spans rack-to-rack runs
  • All-dielectric construction resists EMI and lightning strikes
  • Light-based transmission secures data over 100 km distances

Specifications

BrandIntellinet

Questions about this item

What does the OS2 single-mode 9/125 µm specification mean for transmission distance?

OS2 single-mode fibre with a 9/125 µm core supports links beyond 100 km, far exceeding the 10.0 m length of this patch cable.

What connector type and polish does this duplex cable use, and what panel spacing is required?

It uses two SC connectors with UPC polish; each SC connector needs roughly 9 mm panel spacing for standard duplex cut-outs.

How do I install this SC/SC patch cable without damaging the ferrules?

Remove dust caps, inspect end-faces with a scope, then push each SC connector straight in until the latch clicks — never twist during insertion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.