We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex multimode fiber patch cable with ST and SC connectors, 10.0 m

Intellinet Network Solutions

Intellinet Network Solutions Duplex Multimode ST/SC 62.5/125 OM1 10.0 m Orange

SKU CH-YPHA-MN0JY

Duplex multimode fiber patch cable with ST and SC connectors, 62.5/125 µm OM1, 10.0 m length for Gigabit Ethernet

  • Duplex multimode design enables high-bandwidth Gigabit Ethernet links
  • OM1 62.5/125 µm core supports longer transmission distances
  • ST/SC connectors provide secure, standardised fiber termination
  • 0 m (33.0 ft) length suits rack-to-rack or patch-panel runs
  • Orange jacket allows quick visual identification in dense cabling

Duplex Multimode OM1 Patch Cable

This Intellinet duplex multimode fiber patch cable uses 62.5/125 µm OM1 fiber with ST and SC connectors in a 10.0 m orange jacket. It is built for indoor patching between network equipment, patch panels and wall outlets. The duplex construction carries transmit and receive paths in a single assembly.

For Gigabit Ethernet patching.

The cable suits installers and IT teams who need a ready-made OM1 jumper for Gigabit Ethernet segments within a building. Buyers who need single-mode fiber for campus or metro distances, or who require LC or MTP connectors, should select a different cable type.

62.5/125 µm OM1 fiber with ST/SC ends at 10.0 m

The core/cladding size of 62.5/125 µm defines the OM1 classification and determines which transceivers and link distances are supported. The fixed 10.0 m length and mixed ST/SC termination decide whether this patch cable fits the physical layout of the rack or panel.

Highlights

  • Duplex multimode design enables high-bandwidth Gigabit Ethernet links
  • OM1 62.5/125 µm core supports longer transmission distances
  • ST/SC connectors provide secure, standardised fiber termination
  • 0 m (33.0 ft) length suits rack-to-rack or patch-panel runs
  • Orange jacket allows quick visual identification in dense cabling

Specifications

BrandIntellinet

Questions about this item

Should I pick the 10.0 m length or a shorter run for my Gigabit Ethernet link?

The 10.0 m patch cable matches the OM1 62.5/125 specification, so choose it when the distance between your ST and SC ports is close to that length.

What does the 62.5/125 µm core/cladding mean for actual throughput on my switch?

It identifies an OM1 multimode fiber rated for Gigabit Ethernet distances, so the link will run at 1 Gbps over the full 10.0 m without exceeding the fibre's bandwidth limit.

Will the ST/SC duplex connectors work with standard GBIC or SFP transceivers?

Yes, the duplex ST/SC ends plug directly into matching transceiver ports, and the OM1 multimode rating supports the 1 Gbps speeds those modules provide.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.