Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00084435BTC
In stock
Intellinet Network Solutions
Intellinet Network Solutions Cat8.1 U/FTP Slim Ethernet Cable 10 ft Red 10-Pack
Ten-foot Cat8.1 U/FTP patch cables rated for 40 Gbps and 2000 MHz, with 30 AWG stranded copper, gold-plated contacts and snag-free boots, supplied as a red ten-pack
- TypeNetwork Ethernet Cables
- Cat8
- Connector ARJ45
- Connector BRJ45
- Length10 ft.
- ColorRed
- Supports 40 Gbps at 2000 MHz for future-proof data-centre links
- Pure bare copper conductors deliver maximum conductivity and low loss
- U/FTP aluminium foil shielding on each pair cuts crosstalk and noise
- 50 micro-inch gold-plated contacts resist corrosion for reliable connections
- Ultra-thin 30 AWG stranded design eases routing in dense cabinets
Cat8.1 U/FTP 10-pack for dense installs
This ten-pack of Cat8.1 U/FTP slim patch cables provides 40 Gbps throughput at 2 GHz over 10 ft runs. Each cable uses 30 AWG stranded bare copper with aluminum foil around every pair and 50 µin gold-plated RJ45 contacts. The ultra-thin profile eases routing in crowded racks and improves airflow around active gear. Snag-free boots protect the latch during frequent moves.
Suited for ToR and MoR data-centre links
Installers running 25GBase-T or 40GBase-T between top-of-rack and middle-of-row switches will meet ISO/IEC 11801 and EN 50173-1 Class I limits with these cords. PoE++ / 4PPoE / Ultra PoE devices up to IEEE 802.3bt draw clean power through the 100 % copper conductors. Builders who need longer horizontal runs beyond the channel limit or who prefer solid-core cable for permanent walls should look elsewhere.
Handles 40 Gbps at 2 GHz in short links
The 2000 MHz bandwidth comfortably carries 40 Gbps across the 10 ft length specified for Cat8.1 Class I channels. Shielded pairs keep alien crosstalk low in dense bundles, and the slim jacket allows tighter bend radii without kinking. At greater distances the standard drops to 25 Gbps, so runs exceeding the Class I channel budget will not sustain the top rate.
Highlights
- Supports 40 Gbps at 2000 MHz for future-proof data-centre links
- Pure bare copper conductors deliver maximum conductivity and low loss
- U/FTP aluminium foil shielding on each pair cuts crosstalk and noise
- 50 micro-inch gold-plated contacts resist corrosion for reliable connections
- Ultra-thin 30 AWG stranded design eases routing in dense cabinets
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Model | Cat8.1 U/FTP Slim Ethernet Cable - Multi-Pack |
| Type | Network Ethernet Cables |
| Cat | 8 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 10 ft. |
| Color | Red |
| Shielded | Yes |
| Features | 40G, 2 GHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts |
Questions about this item
What network ports must my equipment have to use these Cat8.1 RJ45 cables?
Your switch, router, server NIC or patch panel needs standard RJ45 ports; the 8.1 Class I cable plugs directly into any 10/25/40 GbE RJ45 interface.
Will the 30 AWG stranded conductors and foil shielding work reliably with my existing Cat6a patch panel?
Yes, the Cat8.1 cable is backward compatible; it terminates on the same RJ45 pinout and the U/FTP shielding adds extra alien-crosstalk margin on Cat6a hardware.
How can I confirm the 2000 MHz / 40 Gbps link is actually active after I plug the cables in?
Check the link speed reported by your switch or NIC — it should read 40GBase-T or 25GBase-T when the full Cat8.1 performance is negotiated.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00082122BTC
In stock
