Intellinet Network Solutions
Intellinet Network Solutions Cat6a U/UTP Slim Patch Cable 5 ft Blue
A 5 ft Cat6a slim patch cable with 100% copper conductors, gold-plated RJ45 connectors and snag-free boots for 10 Gbps and PoE++ up to 500 MHz
- TypeNetwork Ethernet Cables
- Cat6A
- Connector ARJ45
- Connector BRJ45
- Length5 ft.
- ColorBlue
- 10 Gbps throughput at 500 MHz certified Cat6a Class EA
- 100 % bare copper conductors ensure reliable PoE++ power delivery
- Gold-plated RJ45 contacts resist corrosion for lasting signal integrity
- Snag-free boots protect connectors during dense cabinet routing
- Ultra-thin 30 AWG stranded design simplifies tight-space cable management
Slim Cat6a for 10 Gbps runs
This Cat6a U/UTP patch cable delivers 10 Gbps performance at 500 MHz over a 5 ft length. The 30 AWG stranded construction makes it ultra-thin and highly flexible for routing in dense racks or tight pathways. Pure bare copper conductors and gold-plated RJ45 contacts ensure reliable conductivity and corrosion resistance. It meets ISO/IEC 11801 and EN 50173-1 Class EA certification standards.
Snag-free boots and PoE++ support
Snag-free boots protect the RJ45 locking tabs during insertion and removal, preventing broken connectors in high-churn environments. The cable handles all PoE types up to IEEE 802.3bt, including PoE++ and 4PPoE, so it can power demanding devices like PTZ cameras or wireless access points. Heavy-duty strain relief reinforces the connector junction for longer service life. Blue jacket colour aids quick visual identification in colour-coded installations.
Verify connector spacing and bend radius
Confirm that the 5 ft length reaches between your patch panel and switch without tension, as the slim profile offers less slack than standard cables. Ensure the equipment ports accept standard RJ45 plugs and that the snag-free boot profile clears adjacent ports in high-density panels. Check that your installation pathway accommodates the cable's minimum bend radius to maintain Cat6a performance. This cable is not shielded, so avoid routing parallel to power cables in electrically noisy environments.
Highlights
- 10 Gbps throughput at 500 MHz certified Cat6a Class EA
- 100 % bare copper conductors ensure reliable PoE++ power delivery
- Gold-plated RJ45 contacts resist corrosion for lasting signal integrity
- Snag-free boots protect connectors during dense cabinet routing
- Ultra-thin 30 AWG stranded design simplifies tight-space cable management
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Type | Network Ethernet Cables |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 5 ft. |
| Color | Blue |
| Shielded | No |
Questions about this item
Will the 30 AWG stranded copper conductors need replacement after repeated PoE++ cycles?
The cable uses 100 % pure bare copper rated for IEEE 802.3bt PoE++ loads, so the conductors themselves do not wear out from normal power delivery; only physical damage to the jacket or connectors would require replacement.
What is the first limit reached when running 10 Gbps at 500 MHz continuously?
The cable is certified to Cat6a Class EA at 500 MHz, so the 10 Gbps / 500 MHz rating is the sustained performance ceiling; signal integrity is maintained up to that frequency.
Does the slim unshielded design run hotter or draw more power in a packed 10G rack?
The cable carries no active electronics, so it generates no heat and draws no power itself; the ultra-thin 30 AWG stranded build actually improves airflow around equipment in dense cabinets.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



