Intellinet Network Solutions
Intellinet Network Solutions Cat6a S/FTP Patch Cable 7 ft Yellow 26 AWG 500 MHz 10G
A 7 ft yellow Cat6a S/FTP patch cable with 26 AWG pure copper conductors, 500 MHz bandwidth, 10 Gbps speed and gold-plated RJ45 connectors
- TypeNetwork Ethernet Cables
- Cat6A
- Connector ARJ45
- Connector BRJ45
- Length7 ft.
- ColorYellow
- Certified Cat6a Class EA for 10 Gbps at 500 MHz
- S/FTP shielding with aluminum braid and foil per pair blocks crosstalk
- 100 % bare copper conductors ensure maximum conductivity
- 50 micro-inch gold-plated contacts resist corrosion for reliable links
- Snag-free boots and strain relief protect RJ45 connectors during pulls
10 Gbps Cat6a patch cable
This seven-foot Cat6a S/FTP patch cable delivers 10 Gbps data rates at frequencies up to 500 MHz. It uses 100 % pure bare copper conductors and 50 micro-inch gold-plated RJ45 contacts for corrosion-free conductivity. The yellow jacket is colour-coded for T568A and T568B wiring schemes. It suits workstations, switches and PoE++ devices needing certified Class EA performance.
S/FTP shielding and PoE++ support
Each twisted pair is wrapped in aluminium foil and the full core bundle is covered by an aluminium braid, suppressing near-end crosstalk when cables run in parallel. The construction meets ISO/IEC 11801 and EN 50173-1 Class EA requirements. It carries PoE, PoE+ and IEEE 802.3bt PoE++ power up to 100 W without overheating. Snag-free boots and heavy-duty strain relief protect the connectors during frequent moves.
Stranded 26 AWG flexibility for rack runs
The stranded 26 AWG conductors make the cable supple enough for tight patch-panel routing and short rack-to-rack links. RJ45 plugs on both ends connect directly to keystone jacks, switch ports or wall outlets without adapters. Shielded plugs maintain the S/FTP ground path through the connection. It is not suited for in-wall solid-core installations or outdoor burial where a different jacket rating is required.
Highlights
- Certified Cat6a Class EA for 10 Gbps at 500 MHz
- S/FTP shielding with aluminum braid and foil per pair blocks crosstalk
- 100 % bare copper conductors ensure maximum conductivity
- 50 micro-inch gold-plated contacts resist corrosion for reliable links
- Snag-free boots and strain relief protect RJ45 connectors during pulls
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Type | Network Ethernet Cables |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 7 ft. |
| Color | Yellow |
| Shielded | Yes |
Questions about this item
How do I insert the RJ45 connectors into a keystone jack or patch panel without bending the pins?
Align the tab on the snag-free boot with the jack opening and push straight in until the connector clicks; the boot protects the 50 micro-inch gold-plated contacts from bending during insertion.
Will the aluminum foil and braid shielding degrade if the cable is bent repeatedly in a cable tray?
The stranded 26 AWG conductors and flexible S/FTP construction tolerate routine flexing, but sharp kinks can fracture the foil layers; use gradual bends and the heavy-duty strain relief to preserve shielding integrity.
At what length does the 500 MHz bandwidth limit 10 Gbps throughput on this 7 ft cable?
The 7 ft length is well within the 100 m Cat6a channel limit, so the 500 MHz rating supports full 10 Gbps operation without distance-related bandwidth loss.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite
Tripp Lite TLP610COILAM surge protector 6 outlets 10 ft spiral cord 300 J
$94.99
0.00111154BTC
In stock