We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short gray Cat6a S/FTP patch cable with snag-free RJ45 connectors

Intellinet Network Solutions

Intellinet Network Solutions Cat6a S/FTP Patch Cable 1 ft Gray 26 AWG 500 MHz

SKU CH-ATYR-8DBA7

A 1 ft Cat6a S/FTP patch cable rated for 10 Gbps at 500 MHz with full shielding, pure copper conductors and gold-plated RJ45 contacts

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorGray
  • Certified Cat6a Class EA for 10 Gbps at 500 MHz
  • S/FTP shielding with aluminum braid and foil per pair blocks crosstalk
  • 100 % pure bare copper conductors ensure maximum conductivity
  • 50 micro-inch gold-plated contacts resist corrosion for reliable connections
  • Snag-free boots and heavy-duty strain relief protect RJ45 connectors

Certified Cat6a 10G patch cable

The Intellinet Cat6a S/FTP patch cable delivers 10 Gbps performance at 500 MHz over a one-foot length. It meets ISO/IEC 11801 and EN 50173-1 Class EA requirements using 100 percent bare copper conductors and 50 micro-inch gold-plated RJ45 contacts. S/FTP construction shields each pair with foil and wraps the bundle in an aluminum braid to suppress crosstalk. Snag-free boots and heavy-duty strain relief protect the connectors during repeated moves.

Suited for dense rack patches and PoE++ endpoints

This cable fits tight cabinet runs where a short, fully shielded link is needed for 10GBase-T switches, HDBaseT extenders or IEEE 802.3bt PoE++ devices. The stranded 26 AWG build stays flexible for frequent re-patching and the T568A/B colour code matches existing wiring schemes. Installers who need longer horizontal runs, outdoor ratings or unshielded UTP cable should select a different product.

Handles 10 Gbps and full PoE++ power budgets

At 500 MHz the link comfortably carries 10 Gbps traffic and the pure copper cores support the full 4PPoE power envelope without voltage-drop concerns. The one-foot length leaves virtually no headroom for slack management between adjacent rack units, so adjacent ports or longer patch fields will require a longer cable.

Highlights

  • Certified Cat6a Class EA for 10 Gbps at 500 MHz
  • S/FTP shielding with aluminum braid and foil per pair blocks crosstalk
  • 100 % pure bare copper conductors ensure maximum conductivity
  • 50 micro-inch gold-plated contacts resist corrosion for reliable connections
  • Snag-free boots and heavy-duty strain relief protect RJ45 connectors

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorGray
ShieldedYes

Questions about this item

What RJ45 ports must my switch or NIC provide for this Cat6a cable to connect?

Both ends use standard RJ45 connectors, so any switch, router, or network card with 10GBase-T RJ45 ports will accept the cable.

Will the S/FTP shielding and 500 MHz rating cause issues if I run this patch cord alongside older Cat5e cables in the same tray?

The overall aluminum braid and per-pair foil shielding suppress alien crosstalk, so the Cat6a cord operates at its certified 500 MHz without degrading adjacent Cat5e links.

How can I verify the link is running at the rated 10 Gbps after I plug in the 1 ft gray patch cord?

Check the switch or NIC status LEDs and the OS network adapter details — both should report a 10 Gbps full-duplex connection with no errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.