We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 1 ft Cat6a S/FTP patch cable with snag-free RJ45 connectors

Intellinet Network Solutions

Intellinet Network Solutions Cat6a S/FTP Network Ethernet Cable 1 ft White

SKU CH-X23E-93NS5

A 1 ft white Cat6a S/FTP patch cable rated for 10 Gbps at 500 MHz with 26 AWG pure copper conductors, 50 micro-inch gold-plated RJ45 contacts.

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorWhite
  • 10 Gbps throughput at 500 MHz certified Cat6a Class EA
  • S/FTP double shielding with aluminum braid and per-pair foil blocks crosstalk
  • 100 % pure bare copper conductors plus 50 µin gold-plated contacts ensure clean signal
  • Snag-free boots and heavy-duty strain relief protect RJ45 connectors during moves
  • Supports PoE++ up to IEEE 802.3bt and both T568A / T568B wiring standards

Short Patch Cable for Dense Racks

This 1 ft Cat6a S/FTP patch cord connects switches, servers or patch panels inside a single rack. Its stranded 26 AWG conductors make it flexible enough for tight cable managers while the snag-free boots protect the RJ45 latch during frequent moves.

Double Shielding Reduces Crosstalk

Each twisted pair is wrapped in aluminium foil and the whole bundle sits under an aluminium braid, meeting ISO/IEC 11801 and EN 50173-1 Class EA limits. The construction suppresses near-end crosstalk when many cables run side by side in high-density trays.

Suits Installers Needing 10G Over Short Runs

The cable carries 10 Gbps at 500 MHz and supports PoE++ up to IEEE 802.3bt, so it powers access points or cameras without a separate supply. Buyers who need longer horizontal runs or solid-conductor cable for in-wall work should look at a different product.

Highlights

  • 10 Gbps throughput at 500 MHz certified Cat6a Class EA
  • S/FTP double shielding with aluminum braid and per-pair foil blocks crosstalk
  • 100 % pure bare copper conductors plus 50 µin gold-plated contacts ensure clean signal
  • Snag-free boots and heavy-duty strain relief protect RJ45 connectors during moves
  • Supports PoE++ up to IEEE 802.3bt and both T568A / T568B wiring standards

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorWhite
ShieldedYes

Questions about this item

Will the 26 AWG stranded conductors handle continuous 10 Gbps throughput without signal loss?

The cable is certified Cat6a Class EA at 500 MHz per ISO/IEC 11801 and EN 50173-1, supporting sustained 10 Gbps data rates.

Does the S/FTP shielding and aluminum braid keep the cable cool and quiet during all-day PoE++ loads?

Passive cables generate no noise or heat; the S/FTP foil and braid shield only block interference, while 100% copper conductors minimise resistive loss under IEEE 802.3bt power.

Must my switch and patch panel both use T568B wiring for this cable to work?

The cable is colour-coded for both T568A and T568B, so it works with either standard on each end.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.