We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Purple Cat6 UTP patch cable, 1.5 m, RJ45 male ends, snag-free boots

Intellinet Network Solutions

Intellinet Network Solutions Cat6 UTP RJ45 1.5 m Purple

SKU CH-N42D-G7SVS

A 1.5 m Category 6 UTP patch cable with RJ45 male connectors on both ends, gold-plated contacts, snag-free boots and strain relief for 10/100/1000BASE-T networks

  • TypeCategory 6
  • CatCategory 6
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length5 ft.
  • ColorPurple
  • Reliable data transfer up to 1000 Mbps with Category 6 performance
  • Secure connections via gold-plated RJ45 contacts
  • Snag-free boots protect tabs during installation and removal
  • Strain relief moulding extends cable life at connector ends
  • 5 m length suits short runs between switch and device

Intellinet Cat6 UTP Patch Cable 1.5 m

This purple Cat6 cable uses unshielded twisted-pair wiring with RJ45 male connectors on both ends. It is built for home or office networks that need a short, reliable link between a router, switch, modem or wall outlet. The snag-free boots and molded strain relief protect the connectors during repeated plugging and unplugging.

Replaces older Cat5 or damaged patch leads

Swapping a worn Cat5 cable for this Cat6 version restores full gigabit throughput where the old link was limited to 100 megabits. The upgrade is worthwhile whenever a 10/100/1000BASE-T device shows negotiation errors or when a longer, kinked cable is replaced by a tidy 1.5 metre run. Gold-plated contacts keep resistance low over many mating cycles.

Handles 1000 megabit traffic with headroom for PoE

The impedance-matched conductors support 10, 100 and 1000 megabit speeds without packet loss. It runs out of reach beyond 1.5 metres, so longer drops need a different length. The UTP construction offers no shielding against strong electromagnetic interference, so it is not suited for runs alongside power cables or in industrial environments.

Highlights

  • Reliable data transfer up to 1000 Mbps with Category 6 performance
  • Secure connections via gold-plated RJ45 contacts
  • Snag-free boots protect tabs during installation and removal
  • Strain relief moulding extends cable life at connector ends
  • 5 m length suits short runs between switch and device

Specifications

BrandIntellinet
TypeCategory 6
CatCategory 6
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length5 ft.
ColorPurple
ShieldedNo

Questions about this item

What length is the cable and what connectors does it use?

The cable is 1.5 m long and has RJ45 male connectors on both ends.

How do the snag-free boots affect installation?

The molded snag-free boots protect the locking tabs during routing; press the tab fully before pulling to release the connector.

Is the cable shielded and what jacket material is used?

It is an unshielded UTP cable with a rugged PVC sheath and molded strain relief.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.