We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pink Cat6 UTP patch cable with RJ45 connectors, 1.0 m length

Intellinet Network Solutions

Intellinet Network Solutions Cat6 UTP RJ45 1.0 m Pink

SKU CH-KVMH-AB4V6

A 1.0 m pink Cat6 UTP patch cable with gold-plated RJ45 connectors, snag-free boots and strain relief for 10/100/1000BASE-T networks

  • TypeCategory 6
  • CatCategory 6
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length3 ft.
  • ColorPink
  • Reliable Cat6 performance for 10/100/1000BASE-T networks
  • Gold-plated contacts resist corrosion and maintain signal quality
  • Snag-free boots protect the RJ45 clip during installation
  • Moulded strain relief reduces cable stress at the connector
  • Pink 1.0 m length simplifies cable identification

Network cable for short runs

This Cat6 patch cable connects a switch, router or modem to a wall outlet or patch panel. The 1.0 m length keeps cabling tidy on a desk or in a rack. It supports 10, 100 and 1000 Mbps Ethernet links.

Gold contacts and snag-free boots

Gold-plated RJ45 pins resist oxidation for consistent conductivity. Molded strain relief and snag-free boots protect the latch during repeated insertion and removal. The PVC sheath adds durability for daily handling.

Unshielded UTP with pink jacket

The unshielded twisted-pair construction suits typical office and home environments. The pink colour makes the cable easy to identify in a dense bundle. Connectors are wired to TIA/EIA standards for reliable gigabit performance.

Highlights

  • Reliable Cat6 performance for 10/100/1000BASE-T networks
  • Gold-plated contacts resist corrosion and maintain signal quality
  • Snag-free boots protect the RJ45 clip during installation
  • Moulded strain relief reduces cable stress at the connector
  • Pink 1.0 m length simplifies cable identification

Specifications

BrandIntellinet
TypeCategory 6
CatCategory 6
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length3 ft.
ColorPink
ShieldedNo

Questions about this item

Will the gold-plated RJ-45 contacts on this 1.0 m Cat6 cable need cleaning or replacement over time?

Gold-plated contacts resist oxidation and do not require routine cleaning; the snag-free boots and strain relief protect the connector ends during repeated insertions.

What is the first performance limit reached when running 1000BASE-T traffic continuously through this UTP patch cord?

The cable is standards-tested for 10/100/1000BASE-T, so the 100 MHz Category 6 bandwidth ceiling is the limiting factor before any signal degradation occurs.

Does the pink PVC jacket and unshielded design affect heat buildup or noise when the cable carries data all day?

Unshielded twisted-pair construction and a rugged PVC sheath produce no measurable heat rise or audible noise during sustained 1000BASE-T operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.