Intellinet Network Solutions
Intellinet Network Solutions Cat6 U/UTP Slim Network Patch Cable 7 ft Red 10G 250 MHz 30 AWG
Slim Cat6 patch cable with 10 Gbps throughput, 250 MHz bandwidth, pure copper conductors and snag-free boots for dense installs
- TypeNetwork Ethernet Cables
- Cat6
- Connector ARJ45
- Connector BRJ45
- Length7 ft.
- ColorRed
- 10 Gbps speed at 250 MHz for high-bandwidth networks
- 30 AWG slim profile eases routing in tight spaces
- 100 % bare copper conductors ensure reliable PoE++ power delivery
- Gold-plated RJ45 contacts resist corrosion for lasting signal integrity
- Snag-free boots protect connectors during frequent patch-panel changes
High-density Cat6 patch cable
This Cat6 U/UTP slim patch cable measures seven feet and terminates in RJ45 connectors on both ends. It is built for installers who need 10 Gbps throughput at 250 MHz in crowded racks or tight cable pathways. The red jacket aids quick visual identification in colour-coded installations.
Sustained 10 Gbps and PoE++ readiness
The stranded 30 AWG pure copper conductors maintain signal integrity over the full length during continuous 10 Gbps traffic. Gold-plated contacts resist oxidation so resistance stays low under prolonged PoE++ loads up to IEEE 802.3bt. The 250 MHz bandwidth supports the headroom required for sustained high-frequency signalling.
Ultra-thin build with snag-free boots
The reduced diameter improves airflow in dense cabinets and eases routing around corners without kinking. Snag-free boots protect the RJ45 locking tabs during repeated insertion and removal. Heavy-duty strain relief at each connector absorbs pull tension, and the wiring follows both T568A and T568B colour codes for universal patch-panel compatibility.
Highlights
- 10 Gbps speed at 250 MHz for high-bandwidth networks
- 30 AWG slim profile eases routing in tight spaces
- 100 % bare copper conductors ensure reliable PoE++ power delivery
- Gold-plated RJ45 contacts resist corrosion for lasting signal integrity
- Snag-free boots protect connectors during frequent patch-panel changes
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Model | Slim Ethernet Cable |
| Type | Network Ethernet Cables |
| Cat | 6 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 7 ft. |
| Color | Red |
| Shielded | No |
| Features | 10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts |
Questions about this item
Does the 30 AWG stranded cable run hot or draw more power during all-day PoE++ loads?
The 30 AWG pure copper conductors handle IEEE802.3bt PoE++ currents without excess heat; the slim diameter actually improves airflow in cabinets.
What devices must I already have to use the RJ45 connectors on this Cat6 patch cord?
Any equipment with standard RJ45 ports — switches, routers, servers, IP cameras or PoE injectors — wired to T568A or T568B pinouts.
Will the snag-free boots and gold-plated contacts work reliably with older 100 Mbps switch ports I still use?
Yes; the Cat6 cable is fully backward compatible with 10/100/1G ports, and the gold-plated RJ45 contacts resist corrosion on legacy equipment.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



