We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black ultra-thin Cat6 patch cables with gold RJ45 connectors, 3 ft each

Intellinet Network Solutions

Intellinet Network Solutions Cat6 U/UTP Slim Ethernet Cable 3 ft Black 10-Pack 30 AWG

SKU CH-BPEV-8RADD

Ten 3 ft Cat6 patch cables with 30 AWG stranded copper, gold-plated RJ45 connectors and snag-free boots for dense 10 Gbps PoE runs

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorBlack
  • Supports 10 Gbps at 250 MHz bandwidth
  • Pure bare copper conductors ensure maximum conductivity
  • Gold-plated contacts resist corrosion for reliable connections
  • Snag-free boots protect RJ45 clips during installation
  • Ultra-thin 30 AWG stranded design simplifies dense cable management

10-pack Cat6 slim cables

This ten-pack supplies ten three-foot Cat6 U/UTP patch cords with RJ45 connectors on both ends. The 30 AWG stranded conductors make each cable ultra-thin and highly flexible for dense patch panels or tight cabinet runs. Pure bare copper cores and gold-plated contacts deliver reliable conductivity for data and power-over-Ethernet. The cables are terminated to T568A and T568B colour codes.

Ultra-thin design for dense installs

At 30 AWG the cables occupy far less space than standard Cat6, freeing airflow in cabinets and easing routing around corners. Snag-free boots protect the RJ45 tabs during frequent moves, while heavy-duty strain relief guards the solder joints. No shielding is fitted, so the cords stay light and pliable for high-density switching environments. They suit any gigabit or 10GBASE-T port with standard RJ45 jacks.

250 MHz headroom and PoE++ support

Rated to 250 MHz, the links handle 10 Gbps over the full three-foot length with margin for crosstalk. IEEE 802.3bt PoE++ up to 4PPoE passes safely through the pure copper conductors. The short reach keeps insertion loss minimal, but runs longer than three feet are not covered by this pack. Buyers needing extended distances or shielded construction should look elsewhere.

Highlights

  • Supports 10 Gbps at 250 MHz bandwidth
  • Pure bare copper conductors ensure maximum conductivity
  • Gold-plated contacts resist corrosion for reliable connections
  • Snag-free boots protect RJ45 clips during installation
  • Ultra-thin 30 AWG stranded design simplifies dense cable management

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable - Multi-Pack
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorBlack
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Gold-plated Contacts, 10-Pack

Questions about this item

How far can I run these 3 ft Cat6 cables at 10 Gbps before performance drops?

The cables are rated for 250 MHz and 10 Gbps per ISO/IEC 11801 and EN 50288, so the 3 ft length stays well within the channel limits for full speed.

Do the slim 30 AWG conductors get warm or affect PoE delivery when powering devices all day?

Pure bare copper conductors and gold-plated contacts handle IEEE802.3bt PoE++ currents without excess heat, and the thinner jacket improves airflow in dense bundles.

Will these RJ45 plugs work with the T568B wall jacks and patch panels I already have?

Yes, the connectors are wired to both T568A and T568B standards and the snag-free boots fit standard keystone jacks and switch ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.