We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Intellinet Network Solutions

Intellinet Network Solutions Cat6 U/UTP Slim Ethernet Cable 1.5 ft Orange 10G 250 MHz 30 AWG

SKU CH-NWCY-EXSWD

Ultra-thin Cat6 patch cable supports 10 Gbps at 250 MHz with pure copper conductors and gold-plated snag-free connectors

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length1.5 ft.
  • ColorOrange
  • Supports 10 Gbps at 250 MHz per ISO 11801
  • Pure bare copper conductors ensure maximum conductivity
  • Gold-plated RJ45 contacts resist corrosion in any environment
  • Snag-free boots protect connectors during pulls
  • Ultra-thin 30 AWG stranded design simplifies dense cable management

Ultra-thin Cat6 patch cable

This 1.5 ft orange Cat6 U/UTP cable supports 10 Gbps at 250 MHz and all PoE standards up to IEEE802.3bt. Stranded 30 AWG pure copper conductors and gold-plated RJ45 contacts ensure reliable conductivity. Snag-free boots protect connectors during frequent moves in dense racks. The slim profile improves airflow and simplifies routing around tight corners.

Replaces bulky Cat6 or Cat5e patch cords

Install this cable when cabinet density makes standard diameters hard to manage or when tighter bend radius is needed for short runs. The jump is worth it if you need 10G throughput in a space-constrained patch panel and want pure copper rather than copper-clad alternatives. It is not for buyers who need shielded pairs for noisy industrial environments or lengths beyond the short patch range.

Sustained 10G and PoE++ loads

Pure bare copper keeps resistance low during continuous 10 Gbps streams and 4PPoE power delivery up to the IEEE802.3bt limit. Gold-plated contacts resist corrosion through repeated mating cycles. Heavy-duty strain relief and snag-free boots maintain mechanical integrity when cables are repositioned under load. The reduced diameter promotes steady airflow around active gear in fully populated cabinets.

Highlights

  • Supports 10 Gbps at 250 MHz per ISO 11801
  • Pure bare copper conductors ensure maximum conductivity
  • Gold-plated RJ45 contacts resist corrosion in any environment
  • Snag-free boots protect connectors during pulls
  • Ultra-thin 30 AWG stranded design simplifies dense cable management

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length1.5 ft.
ColorOrange
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

What clearance does the 30 AWG slim cable need for routing in a dense patch panel?

The ultra-thin diameter allows routing through tight cable managers and around corners in crowded cabinets without blocking airflow.

How do I terminate the stranded conductors to the RJ45 plugs without damaging the gold-plated contacts?

Use a standard RJ45 crimp tool for stranded wire; the snag-free boots protect the latch during insertion and removal.

When should I replace this patch cord in a PoE++ deployment?

Replace if the snag-free boot tears, the latch fails to click, or the cable shows kinks that could affect 10 Gbps performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.