Intellinet Network Solutions
Intellinet Network Solutions Cat6 Slim Network Patch Cable 5 ft Blue 10G 250 MHz 30 AWG
Slim Cat6 patch cable with 100% copper conductors, gold-plated contacts and snag-free boots for 10G, 250 MHz and PoE++ runs
- TypeNetwork Ethernet Cables
- Cat6
- Connector ARJ45
- Connector BRJ45
- Length5 ft.
- ColorBlue
- Supports 10 Gbps speeds at 250 MHz bandwidth
- Ultra-thin 30 AWG design simplifies dense cable routing
- 100 % pure copper conductors ensure reliable PoE++ power delivery
- Gold-plated RJ45 contacts resist corrosion for lasting signal integrity
- Snag-free boots protect connectors during frequent moves
Ultra-thin Cat6 patch cable for dense installs
This five-foot blue Cat6 patch cable uses a slim 30 AWG stranded construction that is considerably narrower than standard Cat6. The reduced diameter improves flexibility for routing around corners and through tight spaces. It suits installers who need tidy cable management in crowded cabinets or patch panels. Buyers who want a thicker, more rugged jacket for outdoor or industrial pulls should look elsewhere.
10 Gbps at 250 MHz over the full length
The cable meets Cat6 performance with 10 Gbps data rates and 250 MHz bandwidth in accordance with ISO/IEC 11801 and EN 50288. Pure bare copper conductors maintain signal integrity for sustained 10G traffic, unlike copper-clad alternatives that degrade under load. It also supports all PoE standards up to IEEE 802.3bt for powering cameras, access points and other endpoints. Runs that exceed the specified length or use non-compliant connectors will not meet these figures.
Low heat, silent operation
Because the cable carries only data and PoE power, it generates no audible noise and negligible heat in normal use. Gold-plated RJ45 contacts resist corrosion to keep resistance low over time, which helps PoE++ and 4PPoE devices receive stable power. Snag-free boots and heavy-duty strain relief protect the connectors during moves or re-terminations. Installations that require shielded cabling for high-EMI environments are not addressed by this unshielded design.
Highlights
- Supports 10 Gbps speeds at 250 MHz bandwidth
- Ultra-thin 30 AWG design simplifies dense cable routing
- 100 % pure copper conductors ensure reliable PoE++ power delivery
- Gold-plated RJ45 contacts resist corrosion for lasting signal integrity
- Snag-free boots protect connectors during frequent moves
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Model | Slim Ethernet Cable |
| Type | Network Ethernet Cables |
| Cat | 6 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 5 ft. |
| Color | Blue |
| Shielded | No |
| Features | 10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts |
Questions about this item
Does the 30 AWG stranded construction generate noticeable heat or power loss during all-day PoE++ use?
The pure bare copper conductors keep resistance low, so the cable handles IEEE 802.3bt PoE++ currents without measurable heating in normal indoor runs.
What devices must I already own to use this patch cord?
Any two pieces of equipment with standard RJ45 ports — switches, routers, PCs, access points or IP cameras — will connect directly.
Will the snag-free boots and 30 AWG diameter work cleanly alongside older Cat5e patch panels wired to T568B?
Yes, the connectors follow both T568A and T568B pin-outs and the slim boots release easily from legacy high-density panels.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
WAWEIS
WAWEIS power adapter for AmazonBasics SB210 2.1 Channel Bluetooth Sound Bar
$15.99
0.00018432BTC
In stock
