We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Cat6 slim patch cable, 5 ft, RJ45 connectors, snag-free boots

Intellinet Network Solutions

Intellinet Network Solutions Cat6 Slim Ethernet Cable 5 ft Yellow 10G 250 MHz 30 AWG

SKU CH-DANW-89Z7Y

Slim Cat6 patch cable supports 10 Gbps at 250 MHz with stranded 30 AWG copper and snag-free gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length5 ft.
  • ColorYellow
  • Supports 10 Gbps at 250 MHz bandwidth
  • 30 AWG slim profile eases dense cable routing
  • 100 % bare copper ensures reliable PoE++ power delivery
  • Gold-plated contacts resist corrosion for lasting signal integrity
  • Snag-free boots protect RJ45 connectors during installation and removal

Compact Cat6 patch cable for dense installs

This five-foot yellow Cat6 cable uses a 30 AWG stranded construction to fit tight pathways in cabinets and around corners. It targets installers who need 10 Gbps performance without the bulk of standard patch cords. The slim profile eases routing in high-density racks and improves airflow around active equipment.

U/UTP design runs cool with no shielding

The unshielded twisted-pair build carries 10 Gbps at 250 MHz while drawing only the power required by connected PoE devices up to IEEE 802.3bt. Pure bare copper conductors keep resistance low, so the cable adds negligible heat in normal operation. No external grounding or drain wire is needed.

Snag-free boots and gold contacts speed deployment

Moulded snag-free boots protect the RJ45 tabs during pulls through cable managers, reducing connector damage on re-termination. Gold-plated contacts resist corrosion in humid or industrial environments. The cable is colour-coded for both T568A and T568B wiring schemes, so technicians can terminate either standard without guessing.

Highlights

  • Supports 10 Gbps at 250 MHz bandwidth
  • 30 AWG slim profile eases dense cable routing
  • 100 % bare copper ensures reliable PoE++ power delivery
  • Gold-plated contacts resist corrosion for lasting signal integrity
  • Snag-free boots protect RJ45 connectors during installation and removal

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length5 ft.
ColorYellow
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

How do I install this 5 ft Cat6 slim cable and which step do people get wrong?

Match the colour-coded T568A or T568B wiring on both RJ45 ends, then press each connector until the snag-free boot clicks; the common mistake is stopping before the latch fully engages.

What maintenance or replacement will this 30 AWG stranded patch cord need later?

The gold-plated contacts resist corrosion, so only inspect the snag-free boots for cracks after repeated unplugging and replace the cable if the boot splits or the latch fails.

What limit appears first when this 250 MHz cable runs 10 Gbps PoE++ continuously?

The 30 AWG conductors hit their current-carrying ceiling before the 250 MHz bandwidth limit, so sustained IEEE802.3bt loads may warm the cable more than thicker gauges.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.