We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ultra-thin Cat6 patch cable 10 ft with snag-free RJ45 connectors

Intellinet Network Solutions

Intellinet Network Solutions Cat6 Slim Ethernet Cable 10 ft White 30 AWG

SKU CH-ANBA-D7VKE

A 10 ft Cat6 U/UTP slim patch cable with 30 AWG stranded copper conductors, gold-plated RJ45 connectors, snag-free boots and 250 MHz bandwidth for 10G and PoE++ runs

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorWhite
  • 10 Gbps throughput at 250 MHz bandwidth
  • Pure bare copper conductors for reliable PoE++ delivery
  • Ultra-thin 30 AWG design eases routing in dense racks
  • Snag-free boots protect RJ45 clips during pulls and moves
  • Gold-plated contacts resist corrosion for lasting signal integrity

What the cable is and who it fits

A Cat6 U/UTP patch cord built with 100 % pure copper conductors and gold-plated RJ45 contacts. The 10 ft length and 30 AWG stranded wires make it a practical choice for home offices, small-business racks or any installation where space is tight and PoE devices need reliable power delivery.

Capacity and headroom

Rated for 10 Gbps at 250 MHz, the cable handles 10GBASE-T and all PoE standards up to IEEE 802.3bt, including PoE++ and 4PPoE. The unshielded design keeps the diameter small, but it also means the cable is not suited for environments with strong electromagnetic interference or for runs that exceed the standard channel length.

What the bundled features change

Snag-free boots protect the RJ45 tabs during pulls through cable managers or tight conduit. The ultra-thin profile improves airflow in dense cabinets and simplifies routing around corners. Gold-plated contacts resist corrosion, and the T568A/B colour coding ensures consistent termination on both ends.

Highlights

  • 10 Gbps throughput at 250 MHz bandwidth
  • Pure bare copper conductors for reliable PoE++ delivery
  • Ultra-thin 30 AWG design eases routing in dense racks
  • Snag-free boots protect RJ45 clips during pulls and moves
  • Gold-plated contacts resist corrosion for lasting signal integrity

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorWhite
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

Will this Cat6 slim cable run at 10 Gbps with my older Cat5e patch panel?

The cable is rated for 10 Gbps at 250 MHz, but end-to-end speed depends on the lowest category in the link; a Cat5e panel limits the channel to 1 Gbps.

How can I confirm the 10 Gbps link is active after I plug it in?

Check the switch or NIC status LEDs for a 10 G indicator, or run a bandwidth test between the two endpoints to verify throughput near 10 Gbps.

Does the 10 ft white cable include any extra connectors or tools, or is it just the single patch cord?

The box contains one 10 ft Cat6 U/UTP slim patch cable with RJ45 plugs on both ends; no additional connectors, couplers or tools are supplied.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.