We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel 2U open-frame 19-inch vertical wall-mount bracket

Intellinet Network Solutions

Intellinet Network Solutions 716352 2U 19" Vertical Wall Mount Rack Bracket

SKU CH-YP47-3YXQC MPN 716352

A 2U steel bracket that holds standard 19 in. network gear vertically on a wall or horizontally under a desk, supporting up to 135 lbs. with open airflow

  • TypeMounting Racks
  • Rack Units2U
  • ColorBlack
  • MaterialSteel
  • Weight Capacity135
  • Space-saving vertical mounting fits 19" equipment in tight areas
  • Wall-mount hardware included for flush installation on 16-inch stud centres
  • Open frame design ensures airflow and easy cable access
  • Supports up to 135 lbs (61 kg) of network gear
  • Also mounts horizontally under a desk to free workspace

Space-Saving 2U Wall Bracket

This 19-inch vertical wall-mount bracket holds standard rack equipment in tight rooms where a full cabinet will not fit. It targets installers who need to secure patch panels, switches or PDUs without sacrificing floor space. The open steel frame keeps cabling accessible while the unit sits flush against the wall. Horizontal under-desk mounting is also supported for workstations or KVM switches.

Thermals Noise and Power

The open-frame design lets air move freely around mounted devices so heat dissipates without forced cooling. No fans or power supply are built into the bracket itself, so it adds zero acoustic noise and draws no electricity. Steel construction handles the thermal load of attached gear up to the rated 135 lbs (61 kg). Wall-mounting hardware is included for a secure, vibration-free installation.

Build Integration

The bracket follows IEC 60297 and EIA 310 standards with 19-inch / 482.6 mm hole spacing, so any compliant 19-inch device bolts on directly. Mounting holes are spaced 16 inches apart to align with standard wall studs. Two rack units of vertical space are provided, limiting the stack height to 2U of equipment. Cold-rolled SPCC steel 2 mm thick with black RAL 9005 powder coat delivers the stated load capacity.

Highlights

  • Space-saving vertical mounting fits 19" equipment in tight areas
  • Wall-mount hardware included for flush installation on 16-inch stud centres
  • Open frame design ensures airflow and easy cable access
  • Supports up to 135 lbs (61 kg) of network gear
  • Also mounts horizontally under a desk to free workspace

Specifications

BrandIntellinet
TypeMounting Racks
Rack Units2U
ColorBlack
MaterialSteel
Weight Capacity135
Shipping weight1.88 kg
Package size545 × 260 × 260 mm

Questions about this item

How do I attach the 2U bracket to wall studs, and what step is often missed?

Align the bracket’s mounting holes with studs spaced 16 inches apart, use the included hardware, and verify each lag bolt hits the centre of the stud; missing the stud centre is the common error.

What part of this steel bracket will need attention after years of loaded use?

The powder-coated SPCC steel frame itself requires no scheduled maintenance; only the wall anchors should be re-torqued if the 135 lb load causes any loosening over time.

At what point does the 135 lb / 61 kg rating become the limiting factor during continuous operation?

The 135 lb (61 kg) maximum load capacity is the first limit reached; exceeding it risks structural deformation of the 2 mm cold-rolled steel or pull-out of the wall anchors.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.