We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex single-mode fibre patch cable with LC and SC connectors, 3.0 m length

Intellinet Network Solutions

Intellinet Network Solutions 472050 fibre optic cable duplex single-mode LC/SC 9/125 OS2 3.0 m 10.0 ft yellow

SKU CH-4R3H-R0RAG MPN 472050

A 3.0-metre duplex single-mode fibre patch cord with LC/SC connectors for long-distance 10G Ethernet links

  • TypeOthers
  • Connector Number1
  • UPC connectors reduce return loss for cleaner signal transmission
  • Single-mode 9/125 µm OS2 fibre supports long-distance high-bandwidth links
  • Low signal loss enables reliable 10G Ethernet and faster networks
  • 0 m (10.0 ft) yellow duplex cable simplifies rack and patch-panel routing
  • New condition with lifetime warranty ensures lasting performance out of the box

Duplex single-mode LC/SC patch cable

The Intellinet 472050 is a 3.0 metre duplex single-mode fibre optic cable with LC and SC connectors. It uses a 9/125 micron OS2 fibre core and carries a yellow jacket. The cable is supplied new and carries a lifetime warranty from the manufacturer. UPC polished connectors provide low return loss for reliable links.

Suited for long-haul single-mode links

Installers running 10 Gigabit Ethernet or higher over extended distances will find the OS2 specification and UPC finish appropriate. The single connector count means this cable terminates one duplex channel only. Buyers who need multi-mode fibre, different connector polish types or multiple terminated channels in one assembly should look at alternative products.

Fits standard LC and SC patch panels

The mixed LC/SC ends connect directly to matching transceivers or patch panels without adapters. The 3.0 metre length offers flexibility for rack-to-rack or cabinet-to-cabinet runs while keeping excess slack minimal. No power supply, active electronics or special tooling are required for installation.

Highlights

  • UPC connectors reduce return loss for cleaner signal transmission
  • Single-mode 9/125 µm OS2 fibre supports long-distance high-bandwidth links
  • Low signal loss enables reliable 10G Ethernet and faster networks
  • 0 m (10.0 ft) yellow duplex cable simplifies rack and patch-panel routing
  • New condition with lifetime warranty ensures lasting performance out of the box

Specifications

BrandIntellinet
TypeOthers
Connector Number1
Shipping weight0.06 kg
Package size10 × 10 × 10 mm

Questions about this item

What equipment must I already have to use this 3.0 m yellow OS2 cable with LC and SC connectors?

You need devices or patch panels with matching LC and SC single-mode ports operating at the 9/125 µm specification.

How does this 9/125 µm single-mode cable behave alongside older multimode cables I may keep in the same rack?

It operates on a different core size and wavelength, so it will not interfere with multimode links, but it cannot be directly connected to multimode ports without media converters.

How can I verify the 472050 cable is performing correctly after installation?

Check link lights on both ends, run an optical power meter test to confirm low loss, and validate error-free throughput at your target data rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.