We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Intellinet Network Solutions

Intellinet Network Solutions 35 m LC/LC UPC Duplex Singlemode BIF Yellow 9/125 µm G.657.A1 2.0 mm

SKU CH-0TM7-5YRBT

A 35 metre singlemode duplex patch cord with LC/UPC connectors, bend-insensitive G.657.A1 fibre and Corning glass for 40G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length35 m
  • ColorYellow
  • ShieldedNo
  • 35 metre reach for long inter-rack links
  • LC/UPC connectors deliver low return loss
  • Bend-insensitive G.657.A1 fibre reduces bend attenuation
  • Corning ultra-pure glass core ensures low loss
  • Test report included for verified performance

35 m Singlemode Duplex Patch Cable

This 35 metre LC/LC duplex patch cable uses OS2 singlemode fibre with a 9/125 µm core for long-distance, high-speed network links. It is suited to interconnect and cross-connect work in entrance facilities, telecommunications rooms, data centres and desk-side connections. The yellow OFNR jacket identifies singlemode use at a glance.

Verify LC ports and singlemode compatibility

Before ordering, confirm that both ends of your link accept LC connectors and are configured for singlemode operation. The cable is rated for indoor riser (OFNR) use, so check that your routing path meets that fire rating. Ensure the 35 m length matches the measured run plus slack for patch panels or cable management.

Bend-insensitive G.657.A1 fibre under load

Corning ultra-pure glass with G.657.A1 bend-insensitive construction keeps attenuation low when the cable is routed around tight corners or tray edges. UPC polished ferrules maintain consistent return loss during sustained 40 GbE and higher data-rate traffic. Each unit ships with a factory test report confirming insertion loss and return loss performance.

Highlights

  • 35 metre reach for long inter-rack links
  • LC/UPC connectors deliver low return loss
  • Bend-insensitive G.657.A1 fibre reduces bend attenuation
  • Corning ultra-pure glass core ensures low loss
  • Test report included for verified performance

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ALC
Connector BLC
Length35 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

Does the 35 m patch cable arrive with connectors already fitted or do I need to buy LC plugs separately?

The cable ships with LC UPC connectors on both ends and includes a factory test report, so no additional parts are required.

How do I decide between the 35 m length and a shorter run for a 40G Ethernet link?

OS2 single-mode fiber supports 40G Ethernet well beyond 35 m; choose 35 m when the physical route demands that reach, otherwise a shorter cable reduces excess slack.

What does the 9/125 µm G.657.A1 rating mean for everyday routing in a rack?

The 9/125 µm core/cladding with G.657.A1 bend-insensitive fiber keeps attenuation low even when the 2.0 mm jacket is bent tightly around cable managers or patch panels.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.