We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Cat6 UTP keystone jack with gold contacts

Intellinet Network Solutions

Intellinet Network Solutions 210584 Cat6 UTP Punch-Down Keystone Jack Yellow Gold-plated Contacts

SKU CH-HQ2D-CGWVN MPN 210584

Cat6 UTP punch-down keystone jack with 50 micro-inch gold-plated contacts for 22 to 26 AWG solid and stranded wire

  • Cat6 performance to 250 MHz per ISO/IEC 11801
  • 50 micro-inch gold-plated contacts resist corrosion
  • LSA punch-down works with 110 and Krone tools
  • Accepts 22 to 26 AWG solid or stranded wire
  • Supports PoE++ up to IEEE 802.3bt for powered devices

Cat6 UTP Keystone Jack for Patch Panels

This Cat6 RJ45 module fits blank patch panels, wall plates or surface connection boxes. It supports 10G and 1G speeds at 250 MHz in accordance with ISO/IEC 11801. The yellow housing provides colour-coded identification in structured cabling installations.

Gold-Plated Contacts and Punch-Down Flexibility

Fifty micro-inch gold-plated contacts resist corrosion and maintain signal integrity over time. The LSA punch-down design accepts both solid and stranded wire from 22 to 26 AWG. It works with 110, Krone and other standard punch-down tools for versatile termination.

PoE++ Support and UTP Cable Requirement

The jack handles PoE applications up to IEEE 802.3bt, PoE++ and 4PPoE for high-power devices. Verify that your existing cable is unshielded twisted pair Cat6 before ordering. Shielded or lower-category cables are not compatible with this module.

Highlights

  • Cat6 performance to 250 MHz per ISO/IEC 11801
  • 50 micro-inch gold-plated contacts resist corrosion
  • LSA punch-down works with 110 and Krone tools
  • Accepts 22 to 26 AWG solid or stranded wire
  • Supports PoE++ up to IEEE 802.3bt for powered devices

Specifications

No published specifications for this item yet.

Questions about this item

Will the punch-down terminals need re-termination after repeated cable moves?

The LSA punch-down contacts are designed for a single reliable termination; re-using the same slot with solid or stranded 22 to 26 AWG wire can degrade the gas-tight connection, so plan a fresh jack if cables are relocated.

What bandwidth ceiling appears first when the link runs at 10 Gbps continuously?

The jack is rated to 250 MHz per ISO/IEC 11801 and Cat6 10G performance, so sustained 10 Gbps traffic is limited by the 250 MHz channel bandwidth rather than the connector itself.

Does the jack run warm or draw extra power when carrying PoE++ loads all day?

As a passive component it adds no active heat or power draw; the 50 micro-inch gold-plated contacts handle IEEE802.3bt 4PPoE current without measurable temperature rise under normal installation conditions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.