We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex single-mode fiber patch cable with SC connectors, 2.0m length

Intellinet Network Solutions

Intellinet Duplex Single-Mode SC/SC OS2 9/125µm 2.0m Yellow

SKU CH-YCEQ-5G6MA

A 2.0-metre yellow duplex single-mode patch cable with SC/SC connectors for long-distance 10G Ethernet links

  • UPC connectors improve return loss for reliable single-mode links
  • OS2 9/125 µm fiber supports high bandwidth over long distances
  • Low signal loss enables 10G Ethernet and beyond
  • Yellow jacket identifies single-mode duplex patch cable at a glance
  • 0 m (7.0 ft) length fits standard rack and patch-panel spacing

Intellinet Duplex Single-Mode Fiber Patch Cable

This 2.0 metre duplex patch cable uses single-mode 9/125 µm fiber with SC/SC connectors for long-distance network links. It suits installers and IT teams who need reliable point-to-point connections across buildings or campuses. The yellow jacket identifies the OS2 rating at a glance.

Capacity and headroom for 10G Ethernet and beyond

The OS2 single-mode design supports transmission distances over 100 kilometres, far exceeding typical copper limits. Bandwidth headroom handles 10G Ethernet and higher data rates with low signal loss. UPC-polished connectors improve return loss for stable performance. It runs out when a link requires multi-mode cores, angled-polish connectors, or a different connector type such as LC or ST.

Upgrades legacy copper or multi-mode links

This cable replaces copper runs that cannot reach the distance or suffer from electromagnetic interference near power lines or railways. It also upgrades older multi-mode fiber where the core size limits reach or bandwidth. The jump is worth it when security, distance, or EMI immunity become requirements that copper or multi-mode cannot meet.

Highlights

  • UPC connectors improve return loss for reliable single-mode links
  • OS2 9/125 µm fiber supports high bandwidth over long distances
  • Low signal loss enables 10G Ethernet and beyond
  • Yellow jacket identifies single-mode duplex patch cable at a glance
  • 0 m (7.0 ft) length fits standard rack and patch-panel spacing

Specifications

BrandIntellinet

Questions about this item

Will the SC connectors on this 2.0 m OS2 patch cable mate with the SC ports on my older single-mode patch panel?

Yes, the duplex SC connectors follow the standard SC interface used on single-mode patch panels, so they will mate directly with existing SC ports.

How can I verify the link is performing correctly after I connect the cable?

Check the link light on the connected transceivers and run an optical power meter or OTDR test; the UPC polish on these connectors is designed for low return loss in single-mode links.

Does the package include any dust caps or cleaning tools, or do I need to buy them separately?

The cable ships with protective dust caps on both SC connectors; cleaning tools and additional caps are not included and must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.