We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat8.1 S/FTP patch cable, 5 ft, RJ45 connectors with snag-free boots, stranded copper core, braid and foil shielding

Intellinet Network Solutions

Intellinet Cat8.1 S/FTP Network Patch Cable 5 ft Black

SKU CH-4SR0-G80HM

Shielded Cat8.1 patch cable supports 40 Gbps at 2 GHz with pure copper conductors and gold-plated contacts

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length5 ft.
  • ColorBlack
  • Supports 40 Gbps at 2 GHz bandwidth
  • Certified Cat 8.1 Class I per ISO/IEC 11801 and EN 50173-1
  • S/FTP shielding with aluminum braid and foil per pair
  • 100% bare copper conductors with 50 micro-inch gold-plated contacts
  • Snag-free boots and strain relief protect RJ45 connectors

Intellinet Cat8.1 S/FTP Patch Cable

This 5 ft black patch cable is built for 40 Gbps network links in data-centre racks and high-density patch panels. It suits installers who need certified Cat8.1 Class I performance with full shielding for Top-of-Rack and Middle-of-Row runs. It is not for buyers who need longer runs beyond the 5 ft length supplied or who require a different jacket colour for cable management.

Certified Cat8.1 Class I at 2000 MHz

The cable meets ISO/IEC 11801 and EN 50173-1 for 40G and 25G transmission at 2 GHz bandwidth. Each of the four pairs is wrapped in aluminium foil and the bundle sits under an overall aluminium braid, giving S/FTP protection against near-end crosstalk when cables run side by side. Solid 100 % bare copper conductors at 24 AWG replace copper-clad alternatives for maximum conductivity.

Gold-plated contacts and snag-free boots

Fifty micro-inch gold plating on the RJ45 pins resists corrosion across repeated PoE++ cycles up to IEEE 802.3bt. The stranded construction and moulded strain relief keep the cable flexible during rack moves without stressing the terminations. Snag-free boots protect the latch tabs when pulling the cable through crowded cable managers.

Highlights

  • Supports 40 Gbps at 2 GHz bandwidth
  • Certified Cat 8.1 Class I per ISO/IEC 11801 and EN 50173-1
  • S/FTP shielding with aluminum braid and foil per pair
  • 100% bare copper conductors with 50 micro-inch gold-plated contacts
  • Snag-free boots and strain relief protect RJ45 connectors

Specifications

BrandIntellinet Network Solutions
ModelCat8.1 S/FTP Network Patch Cable
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length5 ft.
ColorBlack
ShieldedYes
Features40G, 2 GHz, 100% Copper, 24 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

What does the 40 Gbps rating mean when the cable is installed in a rack?

The cable is certified Cat8.1 Class I for 40 Gbps at 2 GHz, meeting ISO/IEC 11801 and EN 50173-1, so it delivers full 40GBase-T throughput in Top-of-Rack or Middle-of-Row links.

Which connector standard does the cable use and what speed does it limit?

Both ends are RJ45, the standard 8P8C interface for twisted-pair Ethernet; the Cat8.1 certification caps the link at 40 Gbps and 2 GHz over the 5 ft length.

What physical features let the cable fit in dense patch panels?

Snag-free boots and heavy-duty strain relief protect the RJ45 tabs during insertion and removal, while the stranded 24 AWG conductors and 5 ft length keep the bend radius manageable in tight racks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.