Intellinet Network Solutions
Intellinet Cat6a U/UTP Slim Network Patch Cable 7 ft Blue
Slim Cat6a patch cable supports 10 Gbps at 500 MHz with pure copper conductors and snag-free RJ45 connectors
- TypeNetwork Ethernet Cables
- Cat6A
- Connector ARJ45
- Connector BRJ45
- Length7 ft.
- ColorBlue
- Supports 10 Gbps at 500 MHz per ISO 11801 Class EA
- 100% bare copper conductors ensure maximum conductivity for PoE++
- Gold-plated RJ45 contacts resist corrosion in any environment
- Snag-free boots protect connectors during pulls through tight spaces
- Ultra-thin 30 AWG stranded design improves airflow and cable management
High-density Cat6a patch cable
This seven-foot Cat6a U/UTP patch cable is built for installers who need 10 Gbps throughput in tight cabinets or around sharp corners. Its 30 AWG stranded conductors and ultra-thin jacket reduce bulk, improve airflow and simplify routing in dense patch-panel environments. The blue jacket provides instant visual identification alongside colour-coded T568A and T568B wiring. Buyers who require shielded construction or longer runs should look elsewhere.
10 Gbps at 500 MHz with full PoE++ headroom
Certified to ISO/IEC 11801 and EN 50173-1 Class EA, the cable delivers 10 Gbps data rates at frequencies up to 500 MHz. Pure bare copper conductors support every PoE standard through IEEE 802.3bt, including PoE++ and 4PPoE, so power-hungry access points or cameras draw cleanly without voltage drop. The unshielded design means alien crosstalk margins are tighter than shielded alternatives in electrically noisy zones.
Low thermal load and silent operation
With no active components the cable generates no heat and adds zero acoustic noise to the rack. Gold-plated contacts resist corrosion, maintaining low contact resistance over repeated mating cycles. Snag-free boots protect the RJ45 latches during moves, reducing the chance of intermittent links that waste troubleshooting time. The slim profile leaves more space for cool air to reach adjacent equipment.
Highlights
- Supports 10 Gbps at 500 MHz per ISO 11801 Class EA
- 100% bare copper conductors ensure maximum conductivity for PoE++
- Gold-plated RJ45 contacts resist corrosion in any environment
- Snag-free boots protect connectors during pulls through tight spaces
- Ultra-thin 30 AWG stranded design improves airflow and cable management
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Type | Network Ethernet Cables |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 7 ft. |
| Color | Blue |
| Shielded | No |
Questions about this item
Will this Cat6a 500 MHz cable run at 10 Gbps on my older Cat5e patch panel and switch ports?
The cable is certified for 10 Gbps at 500 MHz, but the link will negotiate to the lowest category in the chain — Cat5e panels and ports limit you to 1 Gbps.
How can I verify the 10 Gbps link is actually active after I plug it in?
Check the port LEDs on your switch or the OS network adapter status — they should report a 10 Gbps connection when both ends support it.
Does the 7 ft blue cable come with any extra connectors or do I need to buy RJ45 plugs separately?
Both ends are factory-terminated with gold-plated RJ45 connectors and snag-free boots — no additional plugs or tools are required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
WAWEIS
WAWEIS power adapter for AmazonBasics SB210 2.1 Channel Bluetooth Sound Bar
$15.99
0.00018453BTC
In stock
