We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue slim Cat6a U/UTP patch cable with RJ45 connectors, 3 ft length

Intellinet Network Solutions

Intellinet Cat6a U/UTP Slim Network Ethernet Cable 3 ft Blue

SKU CH-DD1S-M91TR

A slim Cat6a patch cord rated for 10 Gbps and 500 MHz with pure copper conductors, gold-plated RJ45 contacts and snag-free boots for dense installs

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorBlue
  • Supports 10 Gbps at 500 MHz per ISO 11801 and EN 50173-1
  • 100 % bare copper conductors deliver maximum conductivity for PoE++ loads
  • Gold-plated RJ45 contacts resist corrosion in any environment
  • Snag-free boots protect connectors during pulls through tight spaces
  • Ultra-thin 30 AWG stranded design simplifies routing in dense cabinets

3 ft Cat6a slim patch cable for dense installs

This 3-foot Cat6a U/UTP cable is built for high-density racks and tight pathways where space and airflow matter. Its 30 AWG stranded construction makes it noticeably thinner and more flexible than standard Cat6a cords, simplifying routing around corners and through crowded cable managers. The blue jacket provides quick visual identification in colour-coded patch fields. It terminates in RJ45 plugs on both ends.

Passive cable — no thermals, noise or power draw

As a completely passive copper assembly, the cable generates no heat, emits no noise and draws no electrical power of its own. It simply conducts the signals and PoE current supplied by the connected equipment. The 100 % bare-copper conductors and gold-plated contacts keep resistance low, so the link stays within Cat6a insertion-loss limits without active components or external power.

Snag-free boots and PoE++ support change daily

Moulded snag-free boots prevent the locking tabs from catching on adjacent cables, making adds, moves and changes faster and protecting the RJ45 connectors from damage. The cable is rated for all PoE types up to IEEE 802.3bt (PoE++ / 4PPoE / Ultra PoE), so it can carry up to 100 W per port to access points, cameras or LED lighting without a separate power run. Wiring follows both T568A and T568B colour codes.

Highlights

  • Supports 10 Gbps at 500 MHz per ISO 11801 and EN 50173-1
  • 100 % bare copper conductors deliver maximum conductivity for PoE++ loads
  • Gold-plated RJ45 contacts resist corrosion in any environment
  • Snag-free boots protect connectors during pulls through tight spaces
  • Ultra-thin 30 AWG stranded design simplifies routing in dense cabinets

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorBlue
ShieldedNo

Questions about this item

How do I install this 30 AWG slim cable without damaging the RJ45 connector?

Press the RJ45 plug straight into the port until the snag-free boot clicks; the slim 30 AWG jacket bends easily, but forcing it at an angle bends the gold-plated contacts inside.

Will the gold-plated contacts need cleaning or replacement over time?

Gold plating resists corrosion, so the contacts do not require cleaning; replacement is only needed if the snag-free boot tears or the 100 % copper conductors are kinked.

What limits 10 Gbps throughput during a long PoE++ session?

The 500 MHz bandwidth and 3 ft length keep attenuation low, so the first limit is the 10 Gbps Cat6a rating itself, not heat or cable resistance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.