We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short gray Cat6a slim patch cable with RJ45 connectors

Intellinet Network Solutions

Intellinet Cat6a U/UTP Slim Network Ethernet Cable 1 ft Gray 30 AWG

SKU CH-D58S-N6D8J

A 1 ft Cat6a U/UTP slim patch cable rated for 10 Gbps at 500 MHz with 30 AWG pure copper conductors, gold-plated RJ45 contacts, snag-free boots and PoE++ support

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorGray
  • Supports 10 Gbps at 500 MHz per ISO/IEC 11801 and EN 50173-1
  • 100 % bare copper conductors ensure maximum conductivity for PoE++
  • Gold-plated RJ45 contacts resist corrosion in every environment
  • Snag-free boots protect connectors during pulls in tight spaces
  • Ultra-slim 30 AWG stranded design improves airflow and eases cable management

Ultra-thin Cat6a patch cable for dense installs

This 1 ft Cat6a U/UTP cable uses 30 AWG stranded conductors to fit tight cabinet spaces and sharp bends where standard cables bind. It targets installers running 10 Gbps links in crowded racks, patch panels or HDBaseT runs that demand a slimmer profile without dropping to a lower category. The gray jacket is colour-coded for both T568A and T568B wiring schemes.

Thermals noise and power draw

As a passive copper cable it generates no heat and draws no power of its own, so it adds nothing to a cabinet's thermal load. The reduced diameter improves airflow around adjacent equipment, helping active gear stay cooler. Gold-plated contacts resist corrosion, keeping contact resistance stable over time. No active components means zero acoustic noise.

Build fit and freedoms

The snag-free boots protect the RJ45 tabs during repeated insertion and removal, speeding moves and changes in live racks. Certified to ISO/IEC 11801 and EN 50173-1 Class EA at 500 MHz, it meets 10G and PoE++ requirements up to IEEE 802.3bt without needing heavier gauge cable. The slim form factor frees vertical space in cable managers and reduces bend-radius constraints in confined pathways.

Highlights

  • Supports 10 Gbps at 500 MHz per ISO/IEC 11801 and EN 50173-1
  • 100 % bare copper conductors ensure maximum conductivity for PoE++
  • Gold-plated RJ45 contacts resist corrosion in every environment
  • Snag-free boots protect connectors during pulls in tight spaces
  • Ultra-slim 30 AWG stranded design improves airflow and eases cable management

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorGray
ShieldedNo

Questions about this item

How do I plug in the 30 AWG stranded RJ45 connectors without bending the pins?

Align the gold-plated contacts straight into the port and push until the snag-free boot clicks; the slim 30 AWG strands flex easily so keep the cable straight during insertion to avoid pin damage.

When should I replace this Cat6a patch cord in a PoE++ installation?

Replace it if the gold-plated contacts show corrosion, the snag-free boot tears, or the 100 % copper conductors develop kinks that degrade the 500 MHz / 10 Gbps margin.

What sustained load hits the thermal limit first on this 1 ft ultra-thin cable?

Continuous 4PPoE at the full IEEE802.3bt power budget heats the 30 AWG conductors faster than data throughput, so monitor connector temperature in tight bundles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.