We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray shielded Cat6a patch cable with RJ45 connectors and snag-free boots, 5 ft long

Intellinet Network Solutions

Intellinet Cat6a S/FTP Patch Cable 5 ft Gray 26 AWG 500 MHz 10G

SKU CH-WBHA-CPWE2

Cat6a S/FTP patch cable supports 10 Gbps at 500 MHz with full aluminum braid and foil shielding for 10GBase-T and PoE++ networks

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length5 ft.
  • ColorGray
  • Certified Cat6a Class EA for 10 Gbps at 500 MHz per ISO/IEC 11801 and EN 50173-1
  • S/FTP shielding with aluminum foil per pair plus overall braid blocks near-end crosstalk
  • 100 % pure bare copper conductors avoid CCA or CCS conductivity loss
  • 50 micro-inch gold-plated RJ45 contacts resist corrosion for reliable connections
  • Snag-free boots and heavy-duty strain relief protect connectors during installation

Cat6a S/FTP patch cable for 10 Gbps networks

This Cat6a S/FTP patch cable delivers certified 10 Gbps performance at frequencies up to 500 MHz. It uses 100 % pure bare copper conductors and 50 micro-inch gold-plated RJ45 contacts for reliable conductivity. The 5 ft gray cable suits workstation, server and switch connections in high-speed LAN environments.

S/FTP shielding and stranded construction

Each twisted pair is wrapped in aluminium foil and the overall cable is covered by an aluminium braid, providing multi-layer protection against near-end crosstalk when cables run in parallel. Stranded 26 AWG conductors give the flexibility needed for patch-panel and rack routing. Snag-free boots and heavy-duty strain relief protect the connectors during repeated insertion and removal.

Sustained PoE++ power and data under continuous load

The cable supports all Power over Ethernet standards up to IEEE 802.3bt, including PoE++ and 4PPoE, allowing it to carry both maximum data rates and high power simultaneously over long runs. Certified to ISO/IEC 11801 and EN 50173-1 Class EA, it maintains signal integrity under sustained 10GBase-T traffic without the degradation seen in lesser-shielded cables.

Highlights

  • Certified Cat6a Class EA for 10 Gbps at 500 MHz per ISO/IEC 11801 and EN 50173-1
  • S/FTP shielding with aluminum foil per pair plus overall braid blocks near-end crosstalk
  • 100 % pure bare copper conductors avoid CCA or CCS conductivity loss
  • 50 micro-inch gold-plated RJ45 contacts resist corrosion for reliable connections
  • Snag-free boots and heavy-duty strain relief protect connectors during installation

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length5 ft.
ColorGray
ShieldedYes

Questions about this item

What bandwidth limit does the 500 MHz rating impose on 10GBASE-T runs?

The cable is certified for 500 MHz bandwidth, which meets the Class EA requirement for 10 Gbps transmission over the full 5 ft length.

How does the S/FTP shielding affect heat or signal noise during continuous PoE++ loads?

The overall aluminum braid plus per-pair foil shields suppress alien crosstalk and EMI, keeping signal-to-noise ratio stable even when all four pairs carry 4PPoE current.

Which wiring scheme must my existing patch panel or keystone jacks follow for this cable to work?

The cable is color-coded for both T568A and T568B, so it works with either standard without re-termination.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.