We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6a S/FTP patch cable, 10 ft, RJ45 connectors, snag-free boots, braid and foil shielding

Intellinet

Intellinet Cat6a S/FTP Patch Cable 10 ft Black 26 AWG 500 MHz

SKU CH-W4CZ-XPNYE

Shielded Cat6a patch cable with gold-plated RJ45 connectors, 10 ft length, 26 AWG stranded copper, and 500 MHz bandwidth for 10G networks

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorBlack
  • Supports 10 Gbps speeds with Cat6a 500 MHz rating
  • S/FTP shielding blocks interference using braid and foil layers
  • Gold-plated contacts resist corrosion for reliable connections
  • Snag-free boots protect RJ45 clips during repeated use
  • Stranded 26 AWG copper conductors stay flexible for easy routing

Cat6a S/FTP Patch Cable 10 ft

This Intellinet Cat6a S/FTP patch cable is a shielded twisted-pair network lead built for 10 Gigabit Ethernet links. It uses 100 % copper conductors at 26 AWG with gold-plated RJ45 connectors on both ends. The S/FTP construction adds an overall aluminium braid and individual foil around each pair for strong noise rejection. Snag-free boots protect the connectors during repeated plugging and unplugging.

Suited for 10GBase-T runs up to 330 ft

The cable meets TIA/EIA and ISO Category 6a requirements and supports 10GBase-T speeds across the full 100-metre channel. It works with switches, patch panels and other RJ45 networking gear in data centres, offices or home labs. Builders who need longer single cables than 10 ft or who require outdoor-rated jackets should look at other cable types. Installers needing solid-core cable for permanent in-wall runs will also need a different product.

500 MHz bandwidth with 10 ft of headroom

At 500 MHz the cable provides ample margin for 10 Gbit/s traffic over short patch distances. The 10 ft length is ideal for rack-to-rack or desk-to-panel connections inside a cabinet. For runs approaching the 330 ft channel limit the installer must account for total link length including all patch cords and horizontal cable. Beyond the rated frequency or distance the link may not sustain 10 Gbit/s performance.

Highlights

  • Supports 10 Gbps speeds with Cat6a 500 MHz rating
  • S/FTP shielding blocks interference using braid and foil layers
  • Gold-plated contacts resist corrosion for reliable connections
  • Snag-free boots protect RJ45 clips during repeated use
  • Stranded 26 AWG copper conductors stay flexible for easy routing

Specifications

BrandIntellinet
ModelCat6a S/FTP Patch Cable
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorBlack
ShieldedYes
Features10G, 500 MHz, 100% Copper, 26 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

What devices with RJ45 ports do I need to connect this 10 ft Cat6a cable?

Any switch, router, patch panel or network card with standard RJ45 jacks will work; the cable plugs straight in.

Will this 500 MHz shielded cable run at full speed on my older Cat5e patch panel?

The panel will limit the link to its own Cat5e rating, so you will not reach the cable's 500 MHz potential.

How can I verify the link is operating at 10G after plugging in the 10 ft patch cable?

Check the port LEDs on your switch or router — they should show a 10 Gbps connection, and a cable tester can confirm 500 MHz performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.