We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6a S/FTP patch cable 25 ft with RJ45 connectors and snag-free boots

Intellinet Network Solutions

Intellinet Cat6a S/FTP Network Patch Cable 25 ft Gray 26 AWG 500 MHz 10G

SKU CH-3XVH-XZW9P

A 25 ft shielded Cat6a patch cable delivering 10 Gbps at 500 MHz with pure copper conductors and gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length25 ft.
  • ColorGray
  • Certified Cat6a Class EA for 10 Gbps at 500 MHz
  • S/FTP shielding with aluminum braid and foil per pair stops crosstalk
  • 100 % bare copper conductors ensure maximum conductivity
  • 50 micro-inch gold-plated RJ45 contacts resist corrosion
  • Snag-free boots and strain relief protect connectors during installation

25 ft Cat6a S/FTP patch cable

This 25 ft Cat6a S/FTP patch cable delivers 10 Gbps performance at frequencies up to 500 MHz. It uses 100% bare copper conductors and 50 micro-inch gold-plated RJ45 contacts for reliable conductivity. The double-shielded S/FTP construction wraps each pair in aluminum foil and adds an overall aluminum braid to suppress crosstalk. Snag-free boots protect the connectors during routing and removal.

Upgrade from Cat5e or Cat6 links

Replacing Cat5e or Cat6 patch cords with this Cat6a cable removes the 1 Gbps bottleneck on 10GBase-T segments. The 500 MHz bandwidth headroom also improves margin for PoE++ loads up to IEEE 802.3bt. The jump is worth it when switch ports and NICs already negotiate 10 Gbps but existing patch cords limit throughput or introduce errors on longer runs.

Fits standard RJ45 ports and PoE++ gear

Both ends terminate in RJ45 plugs wired to T568A or T568B, so the cable plugs directly into any 10GBase-T port, PoE++ injector or HDBaseT extender. The stranded 26 AWG conductors keep the cable flexible for patch-panel or desk-side routing. Heavy-duty strain relief and the snag-free boot design free up space in dense cabinets by allowing tighter bends without connector damage.

Highlights

  • Certified Cat6a Class EA for 10 Gbps at 500 MHz
  • S/FTP shielding with aluminum braid and foil per pair stops crosstalk
  • 100 % bare copper conductors ensure maximum conductivity
  • 50 micro-inch gold-plated RJ45 contacts resist corrosion
  • Snag-free boots and strain relief protect connectors during installation

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length25 ft.
ColorGray
ShieldedYes

Questions about this item

What clearance does the 25 ft cable and its snag-free boots need behind a patch panel or wall jack?

The stranded 26 AWG cable is flexible for tight bends, and the snag-free boots add only a few millimetres beyond the RJ45 body so it fits standard keystone and patch-panel depths.

Which wiring scheme should I use when punching down or crimping the RJ45 plugs, and what is the common mistake?

The cable is colour-coded for both T568A and T568B; the frequent error is mixing the two standards on opposite ends, which creates a crossover link.

How often should the gold-plated contacts be inspected or the cable replaced in a PoE++ deployment?

The 50 micro-inch gold plating resists corrosion, so inspect contacts only during scheduled moves or if link errors appear; replace the cable if the jacket or shielding shows physical damage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.