We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 7 ft Cat6a S/FTP patch cable with RJ45 connectors and snag-free boots

Intellinet Network Solutions

Intellinet Cat6a S/FTP Network Ethernet Cable 7 ft White 10G 500 MHz 26 AWG

SKU CH-EFSD-6N7K8

A 7 ft white Cat6a S/FTP patch cable supporting 10 Gbps at 500 MHz with pure copper conductors and gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length7 ft.
  • ColorWhite
  • Certified Cat6a Class EA for 10 Gbps at 500 MHz
  • S/FTP shielding with foil per pair plus overall braid blocks interference
  • 100 % bare copper conductors ensure maximum conductivity
  • 50 µin gold-plated RJ45 contacts resist corrosion
  • Snag-free boots and heavy-duty strain relief protect connectors

Certified Cat6a Performance

This cable meets Cat6a Class EA specifications with 10 Gbps bandwidth and 500 MHz frequency rating per ISO/IEC 11801 and EN 50173-1 standards. The 7 ft white patch cord uses 26 AWG stranded conductors for flexible routing in tight spaces. Dual RJ45 connectors feature 50 micro-inch gold-plated contacts for corrosion resistance.

S/FTP Shielding for Demanding Runs

The S/FTP construction wraps each twisted pair in aluminum foil and adds an overall aluminum braid shield, suppressing alien crosstalk when cables run parallel in dense bundles. It suits installers who need reliable 10GBase-T links with PoE++ (IEEE 802.3bt) power delivery. Buyers needing unshielded UTP cables for simpler home runs or outdoor burial-rated jackets should look elsewhere.

Patch-Ready Connectivity

Snag-free boots protect the RJ45 tabs during pulls through cable managers or patch panels, while heavy-duty strain relief guards the termination point. The cable is wired to both T568A and T568B colour codes for universal compatibility with switches, servers and wall outlets. Pure bare copper conductors ensure full PoE++ current capacity without the voltage drop seen in copper-clad alternatives.

Highlights

  • Certified Cat6a Class EA for 10 Gbps at 500 MHz
  • S/FTP shielding with foil per pair plus overall braid blocks interference
  • 100 % bare copper conductors ensure maximum conductivity
  • 50 µin gold-plated RJ45 contacts resist corrosion
  • Snag-free boots and heavy-duty strain relief protect connectors

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length7 ft.
ColorWhite
ShieldedYes

Questions about this item

What RJ45 ports must my router or switch provide for this Cat6a cable to deliver 10 Gbps?

The cable uses standard RJ45 connectors on both ends and is certified for 10 Gbps at 500 MHz, so any switch or router with 10GBase-T RJ45 ports will work.

Can I mix this shielded Cat6a cable with my existing Cat5e or Cat6 patch cords in the same rack?

Yes. The S/FTP shielding with aluminium foil on each pair and an overall braid prevents alien crosstalk, so it runs safely alongside older unshielded cables.

How can I verify the link is running at the rated 500 MHz after I plug it in?

Check the switch or NIC status LEDs and management interface — they should report a 10 Gbps link speed, which confirms the 500 MHz Class EA channel is active.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.