We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 14 ft Cat6a S/FTP Ethernet cable with RJ45 connectors and snag-free boots

Intellinet Network Solutions

Intellinet Cat6a S/FTP Network Ethernet Cable 14 ft Yellow 10G 500 MHz 26 AWG

SKU CH-Q6FR-57VN7

A 14 ft Cat6a S/FTP patch cable rated for 10 Gbps at 500 MHz with double shielding, pure copper conductors and snag-free gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length14 ft.
  • ColorYellow
  • Certified Cat6a Class EA for 10 Gbps at 500 MHz
  • S/FTP shielding with foil per pair plus overall braid blocks crosstalk
  • 100 % bare copper conductors ensure full conductivity and PoE++ support
  • 50 µin gold-plated contacts resist corrosion for reliable connections
  • Snag-free boots and strain relief protect RJ45 plugs during installation

14 ft Cat6a S/FTP patch cable

This 14 ft yellow Cat6a patch cable uses S/FTP shielding with an overall aluminium braid and foil around each pair. It is terminated with RJ45 connectors on both ends and built with 26 AWG stranded conductors. The snag-free boots protect the tabs during routing and removal.

10 Gbps at 500 MHz with PoE++ support

Certified to Cat6a Class EA, the cable handles 10 Gbps data rates at frequencies up to 500 MHz. It supports all Power over Ethernet standards up to IEEE 802.3bt PoE++ and 4PPoE. The pure bare copper conductors and 50 micro-inch gold-plated contacts maintain low resistance and corrosion-free connections.

S/FTP construction for high-interference runs

The double-shielded design suppresses alien crosstalk when cables run in dense bundles or parallel to power lines. It is colour-coded for both T568A and T568B wiring schemes. Installers who need unshielded UTP or a different jacket rating should select an alternative cable type.

Highlights

  • Certified Cat6a Class EA for 10 Gbps at 500 MHz
  • S/FTP shielding with foil per pair plus overall braid blocks crosstalk
  • 100 % bare copper conductors ensure full conductivity and PoE++ support
  • 50 µin gold-plated contacts resist corrosion for reliable connections
  • Snag-free boots and strain relief protect RJ45 plugs during installation

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length14 ft.
ColorYellow
ShieldedYes

Questions about this item

Will this 14 ft Cat6a cable work with my existing Cat5e patch panel and Gigabit switch?

Yes, the cable is backward compatible with Cat5e and Cat6 hardware. It uses standard RJ45 connectors wired to T568A or T568B, so it plugs directly into your existing patch panel and Gigabit switch without any adapters.

How can I verify the cable is delivering 10 Gbps at 500 MHz after I install it?

Use a qualified cable certifier that tests to ISO/IEC 11801 Class EA limits up to 500 MHz, or run a 10GBase-T link test between two 10 Gbps ports and confirm the link negotiates at 10 Gbps with low error counters.

Does the package include only the 14 ft yellow cable, or are there extra couplers or tools inside?

The box contains the single 14 ft yellow S/FTP patch cable with RJ45 connectors on both ends. No couplers, keystone jacks, crimping tools or mounting hardware are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.