We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6a S/FTP patch cable, 10 ft, RJ45 connectors, snag-free boots

Intellinet Network Solutions

Intellinet Cat6a S/FTP Ethernet Cable 10 ft Gray 26 AWG 500 MHz

SKU CH-BPED-0BCCH

A 10 ft Cat6a S/FTP patch cable with 500 MHz bandwidth, 26 AWG pure copper conductors and gold-plated RJ45 connectors for 10G and PoE++ links

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorGray
  • Supports 10 Gbps at 500 MHz per ISO/IEC 11801
  • S/FTP shielding with aluminum braid and foil blocks crosstalk
  • 100 % pure bare copper conductors ensure maximum conductivity
  • 50 micro-inch gold-plated contacts resist corrosion for reliable links
  • Snag-free boots and strain relief protect RJ45 connectors during pulls

Cat6a S/FTP 10 ft 500 MHz

This Cat6a patch cord uses S/FTP shielding with foil around each pair and an overall braid to support 10 Gbps at 500 MHz. It is built with 26 AWG solid bare copper conductors and 50 micro-inch gold-plated RJ45 contacts. Snag-free boots and strain relief protect the connectors during installation. The gray jacket is marked for both T568A and T568B wiring schemes.

Installers needing certified 10G links over short

The cable meets ISO/IEC 11801 and EN 50173-1 Class EA requirements for 10GBase-T and carries PoE up to IEEE 802.3bt. It suits patch panels, switches and HDBaseT extenders in offices or data cabinets. Builders who need longer permanent links or outdoor-rated jackets should look at solid-conductor bulk cable instead.

10 ft stranded S/FTP Cat6a patch cord

The 10-foot length and stranded 26 AWG construction make this cord flexible enough for rack-to-rack or desk connections while keeping alien crosstalk low. Certified 500 MHz bandwidth and full S/FTP shielding decide whether it fits the channel budget for a 10G link. Choose a different length or solid cable if the run exceeds typical patch-cord distances.

Highlights

  • Supports 10 Gbps at 500 MHz per ISO/IEC 11801
  • S/FTP shielding with aluminum braid and foil blocks crosstalk
  • 100 % pure bare copper conductors ensure maximum conductivity
  • 50 micro-inch gold-plated contacts resist corrosion for reliable links
  • Snag-free boots and strain relief protect RJ45 connectors during pulls

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorGray
ShieldedYes

Questions about this item

Will the 26 AWG stranded conductors and snag-free boots fit a standard RJ45 keystone jack?

Yes, the cable uses standard RJ45 connectors on both ends that match T568A and T568B wiring. The 26 AWG stranded wire is flexible for patching, and the snag-free boots protect the latch during insertion and removal.

What is the common mistake when terminating or routing this S/FTP cable for 10G performance?

The cable has individual foil shields around each pair plus an overall aluminum braid. The step people miss is keeping the pair twists and shield continuity intact right up to the connector; untwisting too far or damaging the braid degrades 500 MHz headroom.

How often should the gold-plated contacts be cleaned or the cable replaced in a PoE++ deployment?

The 50 micro-inch gold plating resists corrosion, so cleaning is rarely needed. Replace the patch cord only if the snag-free boot tears, the strain relief cracks, or certification testing shows the 10G 500 MHz link budget is no longer met.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.