We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex fiber patch cable LC UPC to SC APC connectors 5 m length

Intellinet Network Solutions

Intellinet 5 m LC UPC to SC APC Fiber Patch Cable Yellow 9/125 µm BIF G.657.A1

SKU CH-KAT7-M5HDN

Singlemode duplex fiber patch cable with LC UPC to SC APC connectors, 9/125 µm bend-insensitive Corning glass for 40G Ethernet, 5 m yellow jacket, includes test report

  • TypeFiber
  • Length5 m
  • ColorYellow
  • Features9/125 µm, Bend Insensitive Fiber Cable G.657.A8
  • Reduced signal reflection with APC angled connectors
  • OS2 single-mode fiber supports 40G Ethernet speeds
  • Bend-insensitive G.657.A1 design minimises attenuation when bent
  • Corning ultra-pure glass core ensures low-loss transmission
  • 5 metre yellow duplex cable with included test report

Singlemode Duplex Patch Cable

This 5 m yellow cable connects LC UPC and SC APC interfaces across entrance facilities, telecommunications rooms, data centres and desk locations. It uses OS2 singlemode fibre with a 9/125 µm core for high-speed, long-distance links. Corning ultra-pure glass ensures low attenuation and high bandwidth. Each unit ships with a factory test report.

Bend-Insensitive G.657.A1 Design

Bend-insensitive fibre reduces attenuation when the cable is routed around tight corners or twisted during installation. The 2.0 mm duplex jacket meets OFNR fire ratings for in-building runs. APC polished ferrules cut back-reflection to improve return loss on sensitive singlemode links. Low signal loss supports 40 G Ethernet and higher data rates.

Duplex LC UPC to SC APC Connectors

Mixed connector ends let you patch directly between equipment that uses LC UPC ports and patch panels or wall outlets terminated with SC APC. The duplex construction carries transmit and receive fibres in one assembly, simplifying cable management. Lifetime warranty covers the installed link. No power supply or active components are required.

Highlights

  • Reduced signal reflection with APC angled connectors
  • OS2 single-mode fiber supports 40G Ethernet speeds
  • Bend-insensitive G.657.A1 design minimises attenuation when bent
  • Corning ultra-pure glass core ensures low-loss transmission
  • 5 metre yellow duplex cable with included test report

Specifications

ModelSinglemode Duplex BIF, UPC to APC
TypeFiber
Length5 m
ColorYellow
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A8

Questions about this item

How do I install this 5 m LC UPC to SC APC fiber patch cable and which step is often missed?

Clean both connector end-faces with a lint-free wipe and isopropyl alcohol before mating; the step most often skipped is inspecting the ferrules under a microscope to confirm no dust or scratches remain.

What maintenance or replacement will this duplex singlemode cable need over time?

Periodic re-cleaning of the LC and SC ferrules is the only routine task; replace the cable if visual inspection shows cracked ferrules, broken 2.0 mm jacketing, or if insertion loss exceeds your link budget.

What limit appears first on this G.657.A1 bend-insensitive fiber during sustained 40G Ethernet use?

Connector return loss is the first practical limit; the APC polish keeps reflection low, but accumulated contamination or physical stress on the 9/125 µm core will degrade it before the fiber itself reaches its bend radius specification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.