We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex fiber patch cable with SC UPC and SC APC connectors, 3 m length

Intellinet Network Solutions

Intellinet 3 m SC UPC to SC APC Duplex Fiber Cable Yellow 9/125 µm G.657.A1 10 ft

SKU CH-S237-JKBBJ

Singlemode duplex patch cord with UPC to APC connectors, bend-insensitive G.657.A1 fiber, and a 3 m yellow OFNR jacket

  • TypeFiber
  • Length3 m
  • ColorYellow
  • Features9/125 µm, Bend Insensitive Fiber Cable G.657.A11
  • Bend-insensitive G.657.A1 fiber reduces loss when routed tightly
  • UPC and APC connectors minimise return loss for stable links
  • OS2 single-mode 9/125 µm core supports 40G Ethernet and beyond
  • Corning ultra-pure glass ensures low attenuation over 3 m
  • Includes factory test report verifying every connection

Singlemode duplex patch cable

This 3 m yellow patch cable uses OS2 singlemode fiber with a 9/125 µm core and G.657.A1 bend-insensitive glass from Corning. It carries a duplex SC connection with one UPC end and one APC end for lower return loss. The OFNR-rated jacket suits indoor riser runs in data centres, telecom rooms or desk-side links.

UPC-to-APC connector mix

One end is polished UPC for standard equipment ports while the other is angled APC to cut reflected light in sensitive singlemode links. This fixed pairing means the cable only fits links that require exactly that connector combination. Installers needing UPC-UPC or APC-APC must choose a different assembly.

Pre-terminated for quick deployment

The cable arrives factory polished and tested with a report included, so no field termination or fusion splicing is required. Its 2.0 mm duplex zipcord construction keeps pathways tidy in patch panels or cable trays. Builds needing longer reach, different connector types or outdoor-rated jackets will need separate products.

Highlights

  • Bend-insensitive G.657.A1 fiber reduces loss when routed tightly
  • UPC and APC connectors minimise return loss for stable links
  • OS2 single-mode 9/125 µm core supports 40G Ethernet and beyond
  • Corning ultra-pure glass ensures low attenuation over 3 m
  • Includes factory test report verifying every connection

Specifications

ModelSinglemode Duplex BIF, UPC to APC
TypeFiber
Length3 m
ColorYellow
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A11

Questions about this item

What does the 9/125 µm single-mode specification mean for real-world network distance?

The 9/125 µm OS2 single-mode fiber supports high-speed 40G Ethernet links over long distances with low signal loss, suitable for data centre and campus interconnects.

How do the UPC and APC connector polishes affect the return loss on this duplex patch cable?

The UPC connector provides a flat ultra-physical-contact finish for low return loss, while the APC end uses an 8-degree angle to further reduce back-reflection for sensitive single-mode links.

What is the minimum bend radius allowed by the G.657.A1 bend-insensitive fiber in a tight cabinet?

The G.657.A1 bend-insensitive design reduces attenuation when the 2.0 mm duplex cable is routed around tight corners in patch panels or wall boxes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.