We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex singlemode fibre patch cable with LC UPC connectors at both ends, 12 m length

Intellinet Network Solutions

Intellinet 12 m LC/LC UPC Duplex Singlemode BIF Yellow 9/125 µm G.657.A1 39 ft

SKU CH-KWS5-XMQDS

A 12 metre duplex singlemode fibre patch cable with LC/UPC connectors, bend-insensitive G.657.A1 glass and 9/125 µm core for 40G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length12 m
  • ColorYellow
  • ShieldedNo
  • Low return loss from UPC polish on both LC connectors
  • 12 m yellow singlemode duplex cable for indoor routing
  • Bend-insensitive G.657.A1 fiber reduces loss on tight bends
  • Corning ultra-pure glass core delivers low attenuation
  • Supports 40 G Ethernet and higher data rates

12 m LC Duplex Singlemode Patch Cable

This 12 metre duplex singlemode patch cable uses OS2 fibre with 9/125 µm core and cladding. UPC polished LC connectors on both ends deliver low return loss for clean signal transmission. It is built for interconnect and cross-connect work in entrance facilities, telecom rooms, data centres and desk-side links.

Bend Insensitive G.657.A1 for Tight Routing

Corning ultra-pure glass and bend insensitive design to G.657.A1 keep attenuation low when the cable is bent or twisted during installation. The 2.0 mm yellow jacket meets OFNR rating for indoor riser use. Low loss and high bandwidth support 40G Ethernet and beyond across the full 12 m length.

Ships With Test Report and Lifetime Coverage

Each cable arrives with its individual test report so performance is verified before deployment. The duplex LC pair fits standard patch panels and transceivers without adapters. Yellow colour coding identifies singlemode runs at a glance, freeing rack space otherwise needed for colour management.

Highlights

  • Low return loss from UPC polish on both LC connectors
  • 12 m yellow singlemode duplex cable for indoor routing
  • Bend-insensitive G.657.A1 fiber reduces loss on tight bends
  • Corning ultra-pure glass core delivers low attenuation
  • Supports 40 G Ethernet and higher data rates

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ALC
Connector BLC
Length12 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

Will the 12 m LC duplex cable fit alongside my existing OS2 patch leads in the same panel?

Yes, the yellow OS2 singlemode duplex cable uses standard LC/UPC connectors and 9/125 µm fiber, so it matches the geometry and polish of other OS2 patch leads in your panel.

How can I verify the cable is performing to spec once installed?

Each cable ships with a factory test report showing insertion loss and return loss for both fibers; compare those figures with your link budget to confirm performance.

Does the package include any dust caps or cleaning supplies, or must I buy them separately?

The cable is supplied with protective dust caps on both LC connectors; cleaning tools and inspection scopes are not included and must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.