We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SVGA KVM cable coiled, ten feet long, matte finish

Innovera

Innovera SVGA KVM Cable 10 Ft Black 30034

SKU CH-4K2A-25PMZ

A 10 ft Innovera SVGA KVM cable connects a switch to a computer using VGA video plus PS/2 keyboard and mouse leads

  • Length9.236
  • Connect workstations across the desk with a ten-foot reach
  • Carry analogue video signals through standard SVGA conductors
  • Route the cable cleanly in rack or tower builds
  • Install quickly using moulded connectors that fit common KVM ports
  • Identify the correct spare with part number 30034

Direct Connection Cable

The Innovera SVGA KVM cable provides a single ten-foot link between a computer and a compatible KVM switch. It carries analogue video and keyboard and mouse signals through one black sheath. The ten-foot span suits standard desk or rack layouts where the switch sits close to the system. Buyers who need longer runs or digital video formats will need a different cable type.

Replaces Separate Analog Leads

This cable consolidates what would otherwise be three individual cords for VGA video, keyboard and mouse. The jump is worth it when a tidy, pre-assembled harness reduces clutter and eliminates mismatched cable lengths. It does not support digital DVI, HDMI or DisplayPort signals, so systems requiring those interfaces cannot use this assembly.

Consistent Signal Over Full Length

The fixed 9.236-metre construction delivers stable analogue video and peripheral data across the entire run without inline boosters. Signal quality remains steady during extended sessions because the shielded bundle resists typical office electromagnetic interference. No active electronics are present, so performance does not vary with temperature or power-state changes.

Highlights

  • Connect workstations across the desk with a ten-foot reach
  • Carry analogue video signals through standard SVGA conductors
  • Route the cable cleanly in rack or tower builds
  • Install quickly using moulded connectors that fit common KVM ports
  • Identify the correct spare with part number 30034

Specifications

BrandInnovera
Length9.236

Questions about this item

What length is the 30034 cable and will it reach my monitor?

The cable is 9.236 feet long, which is just under the 10-foot nominal length, so measure your rack-to-monitor distance before ordering.

How do I connect the SVGA ends without bending the pins?

Align the 15-pin D-sub connectors carefully, tighten the thumbscrews finger-tight only, and avoid forcing the hood past the port lip.

When should I replace this KVM link?

Replace it if the SVGA connectors develop bent pins, the cable jacket shows cracking, or video flickers when the cable is moved.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.