We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel 19in vented rack shelf 29in deep with end stiffeners

Innovation First, Inc.

Innovation First, Inc. 3USHL-022FULL-29DV 19in 29in server rack shelf

SKU CH-EJ1W-2Q437 MPN 3USHL-022FULL-29DV

19-inch vented steel shelf fits 29-inch depth racks, includes 10-32 and 12-24 mounting screws

  • TypeRack Shelf
  • ColorBlack
  • MaterialSteel
  • SpecificationForm Factor:19"
  • FeaturesPackage Contents: 29in Relay Rack Shelf 12-24 and 10-32 scre
  • Vented design improves airflow around installed equipment
  • End stiffeners add rigidity for heavier loads
  • Mounts in any rack hole at three positions per U space
  • 19-inch rack width fits standard server cabinets
  • 29-inch depth with 17.6-inch usable surface supports deep hardware

19in 29in vented rack shelf

This 19in rack shelf fits standard relay racks and cabinets. It is built from black steel with vented surfaces and end stiffeners for rigidity. The shelf mounts in any rack hole across three locations per U space. Hardware includes both 12-24 and 10-32 screws for quick installation.

Installers needing front-to-back depth of 29in

The 29in depth suits deeper servers, switches and storage arrays that require full-length support. Builders working with shallow 19in racks or limited aisle space should look at a shorter shelf instead. The fixed depth cannot be adjusted after mounting.

17.6in usable width and 29in depth capacity

The 17.6in internal width holds standard 19in rack-mount gear side by side. Vented steel handles continuous airflow for active equipment. Load capacity is limited by the two-point end stiffener design, so very heavy chassis should be supported by a four-post shelf or floor stand.

Highlights

  • Vented design improves airflow around installed equipment
  • End stiffeners add rigidity for heavier loads
  • Mounts in any rack hole at three positions per U space
  • 19-inch rack width fits standard server cabinets
  • 29-inch depth with 17.6-inch usable surface supports deep hardware

Specifications

BrandInnovation
ModelA0582030
TypeRack Shelf
ColorBlack
MaterialSteel
SpecificationForm Factor:19"
FeaturesPackage Contents:
29in Relay Rack Shelf
12-24 and 10-32 screws
Shipping weight8.17 kg
Package size749 × 591 × 140 mm

Questions about this item

Which rack standard must my cabinet follow for the 19in shelf to mount?

The shelf conforms to the 19in rack width standard and fits any cabinet with that spacing.

Will the included 12-24 and 10-32 screws work with the threaded holes on my older rack rails?

Both 12-24 and 10-32 screws are supplied so the shelf can be secured to either thread pattern found on legacy rails.

How can I confirm the vented steel shelf is seated correctly after installation?

The shelf should sit level at the chosen U-space, the end stiffeners should rest against the rack posts, and the vented surface should face upward.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.