We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter with U.2 male and EDSFF 1C connectors, four status LEDs, and a pin header

Innocard

Innocard U.2 PCIe 4.0 to Gen-Z 1C+12V Hot Plug Power Protection Adapter

SKU CH-AYW3-TAFG1

Converts U.2 PCIe 4.0 to Gen-Z 1C with 12 V hot-plug power protection and status LEDs

  • Changer TypeEDSFF
  • Built-in 12V hot-plug power IC with eFuse protection circuit
  • Supports PCI Express 4.0 specification for Gen-Z 1C EDSFF SSDs
  • Compliant with SFF-8639 R3.0, SFF-TA-1001 1.1, SFF-TA-1002 1.3, SFF-TA-1006 1.4 standards
  • Four status LEDs show 12V power, SSD activity, PRSNT0# and 3.3Vaux readiness
  • JP1 pin header enables operation when host lacks 3.3Vaux supply

Purpose-built adapter for Gen-Z 1C EDSFF SSDs

This adapter connects a Gen-Z 1C EDSFF solid-state drive to a U.2 PCIe 4.0 host interface. It is intended for system integrators and datacentre technicians who need to validate or deploy EDSFF storage in existing U.3 backplanes without redesigning the chassis.

Hot-plug power protection and signalling limits

A built-in 12 V hot-plug power IC with eFuse protection manages insertion and removal under load. The board forwards SMB_CLK, SMB_DATA, PWRDIS and DualPortEn signals, while four status LEDs report 12 V power ready, Gen-Z SSD activity, PRSNT0# presence and 3.3 Vaux readiness. If the host does not supply 3.3 Vaux, the JP1 header must be configured on the adapter itself.

Replaces custom interposers

The design consolidates U.3 SFF-8639 male and EDSFF 1C connectors onto a single PCB that meets NVM Express 1.2, PCIe 4.0, SFF-TA-1001 Rev1.1, SFF-TA-1002 Rev1.3, SFF-TA-1006 Rev1.4 and Gen-Z Scalable Connector Rev1.1 specifications. The jump is worthwhile when a standardised, compliant hot-plug path is required instead of a one-off mechanical shim or an unqualified converter.

Highlights

  • Built-in 12V hot-plug power IC with eFuse protection circuit
  • Supports PCI Express 4.0 specification for Gen-Z 1C EDSFF SSDs
  • Compliant with SFF-8639 R3.0, SFF-TA-1001 1.1, SFF-TA-1002 1.3, SFF-TA-1006 1.4 standards
  • Four status LEDs show 12V power, SSD activity, PRSNT0# and 3.3Vaux readiness
  • JP1 pin header enables operation when host lacks 3.3Vaux supply

Specifications

Changer TypeEDSFF

Questions about this item

Should I pick this adapter for a Gen-Z 1C EDSFF SSD or a different form factor?

This adapter is built specifically for Gen-Z 1C EDSFF SSDs and provides a U.3 SFF-8639 male connector on the host side.

What does the PCIe 4.0 rating mean when the adapter is installed in a server?

It supports PCI Express Base Specification Rev 4.0, so the link can run at Gen 4 speeds provided the host, SSD and cabling all meet the same revision.

Which interface standards does the adapter comply with and what do they limit in practice?

It complies with SFF-8639 Rev 3.0, SFF-TA-1001 Rev 1.1, SFF-TA-1002 Rev 1.3, SFF-TA-1006 Rev 1.4 and Gen-Z Scalable Connector Rev 1.1, capping the mechanical, electrical and pin-out requirements to those revisions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.