We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Innocard EP7102 M.2 PCIe 5.0 ReDriver adapter with MCIO 38P to U.3 cable, 50cm

Innocard

Innocard EP7102 M.2 PCIe 5.0 ReDriver to MCIO 38P U.3 Cable 50cm

SKU CH-B4WK-N6GRE

Converts an MCIO 38P connection to M.2 PCIe 5.0 with a built-in ReDriver and clock buffer over a 50cm cable

  • Changer TypePCIe Gen4
  • Extends PCIe 5.0 signals to 32GT/s with built-in ReDriver
  • Converts MCIO 38P to M.2 PCIe 5.0 via SFF-TA-1016 standard
  • 50cm cable kit includes clock buffer for longer trace lengths
  • Hot-swappable SMBus repeater with voltage-level translation on board
  • Dual LEDs show 3.3V power ready and PERST# status

Signal Extension for PCIe 5.0

This Innocard EP7102 kit converts an M.2 PCIe 5.0 slot to an MCIO 38P connector and includes a 50cm cable to a U.3 interface. A built-in ReDriver extends 32GT/s differential signals while a clock buffer drives longer trace lengths. The assembly is designed and made in Taiwan.

Replaces Direct M.2 Mounting

The adapter replaces a direct M.2 installation when the drive must sit farther from the host board. The jump is worth it when cable routing or chassis layout prevents a native M.2 connection and PCIe 5.0 signal integrity must be maintained across the 50cm link.

Sustained Link Stability

Under sustained load the on-board ReDriver and 100MHz clock buffer preserve 32GT/s signalling across the extended path. The 3.3V load switch with reverse-current protection and the SMBus repeater with hot-swap level translation keep power and side-band signals stable during continuous operation.

Highlights

  • Extends PCIe 5.0 signals to 32GT/s with built-in ReDriver
  • Converts MCIO 38P to M.2 PCIe 5.0 via SFF-TA-1016 standard
  • 50cm cable kit includes clock buffer for longer trace lengths
  • Hot-swappable SMBus repeater with voltage-level translation on board
  • Dual LEDs show 3.3V power ready and PERST# status

Specifications

Changer TypePCIe Gen4

Questions about this item

What M.2 slot length and MCIO connector pin count does the EP7102 adapter kit require?

The kit converts a 38-pin MCIO connector (SFF-TA-1016) to an M.2 PCIe 5.0 slot with a 50 cm cable between them.

How is the PERST# signal handled during installation, and which MCIO pin carries it?

A bidirectional voltage-level translator routes PERST# to MCIO pin A11; connect the cable so the host drives PERST# through that pin.

Which on-board LEDs show power and reset status, and what do their colours mean?

Green LED1 lit means 3.3 V is ready; red LED2 lit means PERST# is asserted, and it turns off when PERST# de-asserts normally.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.