We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with 1602 LCD and six buttons

INLAND

INLAND LCD Keypad Shield 1602 Display Module

SKU CH-NCAR-RADMB

Combines a 1602 LCD display with six buttons in a shield compatible with UNO R3 boards

  • Integrated 1602 LCD display simplifies visual output
  • Six built-in buttons enable direct user input
  • Single shield combines screen and controls
  • Green board identifies the module at a glance
  • Fully compatible with UNO R3 control board

LCD shield for Arduino UNO R3

The Inland LCD Keypad Shield combines a 1602 character display with six push buttons on a single green printed circuit board. It plugs directly onto an UNO R3 control board without wiring, giving hobbyists and students an instant text and menu interface for microcontroller projects.

1602 display with six-button keypad

The decisive specification is the integrated 1602 LCD and six tactile switches that share the UNO R3 pin header. Buyers who need a different display resolution, touchscreen input or a standalone module without the shield form factor cannot use this board.

Low-power passive operation

The shield draws only the small current required by the 1602 backlight and the UNO R3 logic, adding negligible heat and no audible noise to the host board. Normal use leaves the UNO R3 thermal profile unchanged.

Highlights

  • Integrated 1602 LCD display simplifies visual output
  • Six built-in buttons enable direct user input
  • Single shield combines screen and controls
  • Green board identifies the module at a glance
  • Fully compatible with UNO R3 control board

Specifications

No published specifications for this item yet.

Questions about this item

What does the 1602 display show when the shield is mounted on an UNO R3?

The 1602 LCD provides two lines of sixteen characters each, giving immediate text feedback from the UNO R3 without a separate monitor.

How does the shield connect to the UNO R3 control board?

It plugs directly onto the UNO R3 header pins, using the standard Arduino shield interface for power and data.

What board spacing is required to mount this shield on an UNO R3?

The shield matches the UNO R3 footprint, so no extra standoffs or clearance beyond the standard header height are needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.