We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of 100 blue rubber RJ45 strain relief boots

iMBAPrice

iMBAPrice RJ45 Blue Ethernet Strain Relief Boots 100 Pack

SKU CH-F2MR-ZK5D4

Pack of 100 blue rubber boots that protect RJ45 Ethernet connectors from cable strain

  • Typeethernet
  • Protects RJ45 connectors from damage with flexible rubber boots
  • Blue colour simplifies cable identification in dense racks
  • Pack of 100 covers large installations or spare stock
  • Compatible with standard Ethernet cable assemblies for custom builds
  • Slips over plug before termination to add strain relief

Pack of 100 Ethernet cable boots

This pack supplies one hundred blue strain-relief boots for RJ45 connectors. They are designed for technicians and hobbyists who terminate their own Cat5e or Cat6 patch cables. The rubber sleeves protect the latch tab and reduce cable bend stress at the plug.

Replacing worn or missing connector boots

Use these boots when the original moulded boot has cracked, split or fallen off an existing patch lead. They also finish a newly crimped connector so the latch survives repeated insertion cycles. The jump is worth it whenever a cable end sees frequent plugging and unplugging in a rack or wall plate.

Behaviour under repeated insertion cycles

The flexible rubber absorbs the sideways force that snaps bare latch tabs during daily patching work. It keeps the connector seated firmly in the port even when cables are routed tightly around cable managers. The material stays pliable after months of rack-temperature exposure.

Highlights

  • Protects RJ45 connectors from damage with flexible rubber boots
  • Blue colour simplifies cable identification in dense racks
  • Pack of 100 covers large installations or spare stock
  • Compatible with standard Ethernet cable assemblies for custom builds
  • Slips over plug before termination to add strain relief

Specifications

BrandiMBAPrice
Typeethernet

Questions about this item

What cable diameter do the 100 blue RJ45 strain-relief boots accommodate?

The boots are designed for standard RJ45 Ethernet connectors and fit typical Cat5e or Cat6 cable jackets used in patch-cord assembly.

How do you install the boots without damaging the connector latch?

Slide each boot onto the cable before crimping the RJ45 plug; once the plug is crimped, push the boot forward until it seats over the connector body, taking care not to bend the latch tab.

When should the 100-pack boots be replaced on a patch cable?

Replace a boot whenever the rubber cracks, splits or no longer grips the cable jacket, which typically occurs after repeated flexing or when the latch tab breaks off.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.