We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten blue shielded Cat6 patch cables with moulded boots, each three feet long

iMBAPrice

iMBAPrice Cat6 Shielded Patch Cable Blue 10 Pack 3 ft

SKU CH-AEVB-GVHE5

Ten shielded Cat6 patch cables with 26AWG bare-copper conductors, double foil-and-braid shielding and gold-plated RJ45 plugs, each three feet long

  • TypeCable
  • Ten cables simplify wiring multiple devices
  • Supports 10 Gbps over 100 metres
  • Double shielding reduces crosstalk and interference
  • 50 µm gold contacts resist corrosion
  • Molded boot protects the latch from snags

Ten-pack shielded Cat6 cables

This ten-pack supplies three-foot Cat6 shielded patch cables for wiring multiple devices in a rack or desk setup. Each cable uses 26 AWG stranded bare copper conductors with double shielding — foil around each pair and an overall braid — to meet 500 MHz bandwidth requirements. The 50-micron gold-plated RJ45 plugs are shielded and fitted with moulded snagless boots for durable connections.

Simple plug-in installation

The RJ45 connectors click into standard Ethernet ports without tools, and the snagless boots prevent the release tabs from catching on adjacent cables during routing. Because the conductors are stranded, the cables flex easily around tight bends behind patch panels or switches. The only common issue is exceeding the 100-metre channel limit for 10GBASE-T, which these short three-foot lengths avoid entirely.

Stable throughput on long runs

The double-shielded construction suppresses alien crosstalk so 10GBASE-T links hold full speed across the full 100-metre channel defined by TIA/EIA-568-B-2-10 and ISO/IEC 11801 Class EA. Bare copper conductors keep resistance low, reducing heat build-up during sustained 10 Gb/s traffic. UL listing and RoHS compliance confirm the materials meet safety and environmental standards for permanent infrastructure.

Highlights

  • Ten cables simplify wiring multiple devices
  • Supports 10 Gbps over 100 metres
  • Double shielding reduces crosstalk and interference
  • 50 µm gold contacts resist corrosion
  • Molded boot protects the latch from snags

Specifications

BrandiMBAPrice
TypeCable

Questions about this item

How can I verify the cable is operating at Cat6A 500 MHz performance after installation?

Test the link with a certified cable analyser that reports frequency response up to 500 MHz and confirms compliance with TIA/EIA-568-B-2-10 class EA and ISO/IEC 11801 standards.

What is included in the 10-pack and are any additional components required for a typical patch-cord deployment?

The pack contains ten 3 ft double-shielded Cat6A patch cords with 50-micron gold-plated RJ45 plugs and moulded snagless boots; no extra parts are needed for standard connections.

Which version should I choose if my switch ports are 10GBASE-T and the run length is under 100 metres?

Select the 10G Cat6A shielded version listed; it supports 10GBASE-T over 100 metres at frequencies up to 500 MHz with double shielding and 26 AWG stranded copper.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.