We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey rectangular cable tester with detachable remote unit and LED display, approx 143 x 85 x 25mm

iMBAPrice

iMBAPrice 4-in-1 Network Cable Tester USB BNC RJ11 RJ45

SKU CH-E6GY-BVKJP

Tests USB, BNC, RJ11 and RJ45 cables for continuity, shorts, opens and crossed pairs with LED readout and remote unit

  • TypeNetwork Cable
  • Tests USB, RJ11, RJ45 and BNC cables for continuity
  • Detects shorts, opens and crossed wire pairs automatically
  • Separable remote unit enables end-to-end cable verification
  • Two-speed auto-scan with LED fault readout
  • Compact 143 x 85 x 25 mm body weighs 175 g

Multi-Function Cable Tester

The iMBAPrice 4-in-1 tester checks continuity on USB, BNC, RJ11 and RJ45 cables. It identifies open circuits, shorts and crossed wire pairs for installers and IT technicians. The remote unit separates from the main body for end-to-end verification on installed runs. A carrying bag and English manual are included in the pack.

Battery Operation and Indicators

The unit runs on a single 9 V 6F22 alkaline battery which is not supplied. A low-battery LED warns when voltage drops below usable level. Fault results appear through LED arrays showing no connection, short, open or crossover conditions. Two-speed auto-scan lets the user choose between quick checks and slower detailed reads.

Sustained Testing Behaviour

During extended sessions the LED display remains readable while the tester cycles through each wire pair. The separable remote stays attached to the far end without signal degradation across the 143 x 85 x 25 mm chassis. Continuous scanning draws minimal current so the 175 g unit operates for long periods on one cell. No active cooling or external power is required.

Highlights

  • Tests USB, RJ11, RJ45 and BNC cables for continuity
  • Detects shorts, opens and crossed wire pairs automatically
  • Separable remote unit enables end-to-end cable verification
  • Two-speed auto-scan with LED fault readout
  • Compact 143 x 85 x 25 mm body weighs 175 g

Specifications

BrandiMBAPrice
TypeNetwork Cable

Questions about this item

How do I connect the main tester and the remote unit for a continuity check?

Attach one end of the cable to the main tester and the other end to the separable remote unit, then press the push button to start the scan.

What will I need to replace to keep the tester working?

The unit runs on a single 9 V 6F22 alkaline battery which is not included and must be replaced when the low battery LED lights.

What length limit appears first when testing long runs?

The tester shows open faults when a cable exceeds the continuity range of the connected wire pairs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.