We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex fibre cable with LC connectors and silver armoured jacket, 30 metres

iMBAPrice

iMBAPrice 10Gb OM3 LC/LC Duplex Armoured 30m

SKU CH-E8TJ-R6YA5

30-metre OM3 duplex fibre cable with double-armoured LSZH jacket and LC/LC connectors for 10 Gb Ethernet

  • TypeCable
  • 10 Gb duplex OM3 link over 30 m (98 ft)
  • LSZH double-armoured jacket resists fire and crush
  • Factory-tested 100 % for insertion and return loss
  • LC/LC duplex zipcord with zirconia ceramic ferrules
  • Backward compatible with existing 50/125 µm multimode fiber

30-metre OM3 LC duplex fibre cable

This 30-metre duplex multimode patch cord is rated OM3 for 10-gigabit Ethernet links. It uses 50/125 µm fibre with LC/LC connectors and a low-smoke zero-halogen armoured jacket. The construction suits storage-area networks, data-centre interconnects and high-speed LAN backbones. Buyers needing a pre-terminated, factory-tested run for 10 GbE over 850 nm VCSEL optics will find it fits the spec.

Check connector polish and patch-panel density

Verify that your transceivers and patch panels accept LC duplex connectors in a protective yoke with strain-relief boots. Confirm the 2.0 × 4.2 mm zipcord diameter clears your cable-management channels and that the armour does not exceed bend-radius limits in your tray. Ensure the OM3 rating matches the link budget calculated for your 850 nm equipment. Existing 50/125 µm infrastructure is backward compatible.

Armoured LSZH jacket and zirconia ferrules

The double-armoured LSZH sheath resists crush, abrasion and flame while meeting plenum safety requirements. Zirconia ceramic ferrules and precision factory testing for insertion and return loss to TIA-568-C.3 keep attenuation low across the 30-metre span. The yoke-protected LC ends survive repeated mating cycles in dense panels. Installers gain a rugged, low-loss link without the cost of singlemode cabling.

Highlights

  • 10 Gb duplex OM3 link over 30 m (98 ft)
  • LSZH double-armoured jacket resists fire and crush
  • Factory-tested 100 % for insertion and return loss
  • LC/LC duplex zipcord with zirconia ceramic ferrules
  • Backward compatible with existing 50/125 µm multimode fiber

Specifications

BrandiMBAPrice
TypeCable

Questions about this item

Does the 30m LC/LC duplex cable arrive ready to plug in, or do I need separate connectors?

The cable ships with LC connectors on both ends in a protective yoke, strain-relief boots and zirconia ceramic ferrules already fitted, so no extra connectors are required.

Why choose the OM3 50/125 version instead of 62.5 µm multimode?

OM3 50/125 µm fiber delivers nearly three times the bandwidth of 62.5 µm multimode, enabling 10Gb serial transmission at 850 nm over the full 30m distance.

What does the 10Gb rating mean when the cable is installed in a live link?

It is factory tested for insertion and return loss per TIA-568-C.3, supporting 10-Gigabit Ethernet over 30 metres with LSZH armoured jacket for low-smoke, zero-halogen safety.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.