iKKEGOL 20M 98ft BNC Video DC Power Extension Cable

20-metre BNC video and power cable

This 20-metre extension cable combines a BNC composite video line with a DC power line in a single jacket. It is intended for CCTV cameras and DVRs that need both signal and power run over the same distance. The black cable uses standard BNC connectors for video and 2.1 mm by 5.5 mm plugs for power. It suits installers who want a pre-made run without crimping their own ends.

Suits single-camera runs needing both signals

Installers wiring one camera per cable will find the combined video and power cores convenient. The 20 AWG power conductors help maintain voltage over the full length. Builders who need separate video and power routes, or who require a different power connector size, should look at a different cable type. The fixed 98-foot length also limits use where a shorter or longer run is required.

Fits standard CCTV power and video ports

The male BNC plug connects directly to a camera or DVR video input, while the male 2.1 mm by 5.5 mm power plug feeds the camera. The female 2.1 mm by 5.5 mm socket on the other end accepts a matching power supply. Fully screened video wiring reduces interference along the run. No additional adapters are needed when the equipment uses these common CCTV interfaces.